Cámara de Internet inalámbrica SecurView con giro/inclinación/teleobjetivo para día y noche
TV-IP422W (Version A1.0R)
- No necesita una conexión de cable Ethernet: El video se transmite por medio de una señal inalámbrica encriptada
- Visibilidad nocturna en un rango de hasta 5 metros (16.4 pies)
- Asegure un área más amplia con el movimiento de rotación vertical y horizontal (pan/tilt)
- Mueva la cámara de un lado a otro en un ángulo de 330 grados e inclínela hacia arriba o hacia abajo unos 105 grados desde cualquier conexión a Internet
- Programe la grabación de detección de movimientos y alertas por correo electrónico con un software complementario
DISCONTINUED PRODUCT
The TV-IP422W (Version A1.0R) has been discontinued. It has been replaced by the TV-IP460PI (Version v1.0R). For a list of discontinued products, click here.Firmware
NO actualice el firmware de ningún producto TRENDnet con conexión inalámbrica. Actualizar el firmware a través de una conexión inalámbrica podría dañar el producto. Realice la actualización del firmware únicamente a través de una conexión "por cable" |
Firmware Version: V1.1.1 build 98
Release Date: 1/2015
Note:
- Fix ActiveX buffer overflow issue
- Apply new security key to ActiveX/java applet
Note:
- The new firmware natively works with Internet Explorer 10. If you have Internet Explorer 11 or higher version. Please add the camera on the compatibility setting list.
- Please change the Java setting with Java Control app to turn off blocking self-signing apps.
- More details included in the firmware upgrade instruction file.
Nombre del archivo: FW_TV-IP422W(1.1.1.98).zip
SHA-1 Checksum: F22346F2670523F75F31162FB8E0EBEFAAF77019
Fecha: 7/27/2017
Tamaño del archivo: 4.46 MB
Software
Software Version: 2.5.9
Release Date: 4/2017
Notes:
- Fixed TV-IP420P P/T issue
Nombre del archivo: TRENDnetViewPro(2.5.9).zip
SHA-1 Checksum: 7CD1D9AE621816395E9FE9644B651F3696388215
Fecha: 7/27/2017
Tamaño del archivo: 41.15 MB
Hoja de datos
Nombre del archivo: EN_Spec_TV-IP422W(A1.0R).pdf
Fecha: 5/5/2011
Tamaño del archivo: 1.53 MB
Nombre del archivo: FR_Spec_TV-IP422W(A1.0R).pdf
Fecha: 5/5/2011
Tamaño del archivo: 1.56 MB
Nombre del archivo: GE_Spec_TV-IP422W(A1.0R).pdf
Fecha: 5/5/2011
Tamaño del archivo: 1.56 MB
Nombre del archivo: SP_Spec_TV-IP422W(A1.0R).pdf
Fecha: 5/5/2011
Tamaño del archivo: 4.70 MB
Nombre del archivo: RU_Spec_TV-IP422W(A1.0R).pdf
Fecha: 5/5/2011
Tamaño del archivo: 2.89 MB
Nombre del archivo: ITA_Spec_TV-IP422W(A1.0R).pdf
Fecha: 5/5/2011
Tamaño del archivo: 3.52 MB
Guía de instalación rápida
Nombre del archivo: EN_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.02 MB
Nombre del archivo: FR_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.02 MB
Nombre del archivo: GE_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.02 MB
Nombre del archivo: PO_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.01 MB
Nombre del archivo: SP_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.02 MB
Nombre del archivo: RU_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.82 MB
Nombre del archivo: EST_QIG_TV-IP422-422W(A1.0R).pdf
Fecha: 2/18/2009
Tamaño del archivo: 1.02 MB
Guía del usuario
Nombre del archivo: UG_TV-IP422_TV-IP422W(A2.21).pdf
Fecha: 4/26/2010
Tamaño del archivo: 3.96 MB
Imágenes de productos
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
The files cannot be accessed through the camera. Dismount the USB memory stick from the camera and connect it to your computer....
The USB page does not automatically update, press Control + F5 simultaneously to refresh the page.
The USB stick may not be formatted in FAT, to check connect USB stick to your computer. Go to My Computer right click on the USB stick go to Properties look for File System....
Unfortunately due to the IR lights causing a reflection from an ensclosures dome when there is not enough light we do not recommend using the TV-IP422 (w) in an enclosure....
No, unfortunately the IR lights do not have a manual switch. They will activate automatically when there is not enough light....
Log into the camera and click on Setup then click on Event Server>Network Storage on the left hand side. Enter your Samba server information here.
After applying the Samba server information click on Event Config on the left hand side. You have three options, Motion Detection, Schedule...
The camera must be configured properly to have Internet access. This includes making sure you have entered a valid default gateway address for the camera and valid DNS server entries to ensure it can resolve names.
Unfortunately the camera does not support SSL. If the email provider requires SS...
TRENDnet offers TREDnet VortexIP, an advanced Server-based IP camera management software solution designed for small, medium and large enterprise applications and packed full of advanced security features. You can find more information regarding TRENDnet VortexIP here.
https://www.TRENDnet.com...
Unfortunately the cameras from different families do not share a common, free, application and cannot be used together. SecurView cameras will not function in IPView Pro and vice versa.
We do offer TRENDnet VortexIP as a software solution for our cameras. You can find information regarding TREND...
By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera.
Unfortunately SecurView is not compatible with Macintosh operating systems.
The camera can be configured from a Macintosh through its web-based configuration page. The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening your web browser and entering htt...
The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering https://192.168.10.30 into the address line....
The camera by default is configured to receive an IP address via DHCP. If it is unable to receive an IP address via DHCP it will default to 192.168.10.30. You can use the IP Setup Utility to find and change the IP address of the camera as well.
...
Log into the camera and click on Setup. Click on Motion Detect on the left hand side. On this page you can setup two motion detection windows. Under "Window" you can select either 1 or 2. Place a check in "Enable" to turn on motion detection. You can adjust the threshold for each window indi...
Warning:
Firmware upgrade failure may permanently damage the unit and cause it to malfunction. Do not interrupt the firmware upgrade process by disconnecting it from the network or unplugging its power from the power outlet once the firmware upgrade process has begun. Never perform a firmware upgr...
The TV-IP422 (w) is not a PoE device. However, you can use an injector and splitter combination for a PoE solution.
Injector: TPE-101ihttps://www.TRENDnet.com/products/product-detail.asp?prod=105_TPE-101I
Splitter: TPE-102shttps://www.TRENDnet.com/products/product-detail.asp?prod=100_TPE-1...
Log into the camera and click on Setup then click on Event Server>Email on the left hand side. Enter your email server and user information here.
After applying the email server information click on Event Config on the left hand side. You have three options, Motion Detection, Scheduled...
Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here.
After applying the FTP server information click on Event Config on the left hand side. You have three options, Motion Detection, Scheduled uploading and ...
Once you have the camera configured on your network start SecurView. Click on the "Settings" button then click on the "Add Camera" button. It will search your network for any supported cameras and display a list of them. Highlight the camera you want to view in SecurView then click "Add Camera".
...
The supported browsers are Internet Explorer 6.0 or above.
Please refer to our Camera Helper to determine what hardware specs would be recommended for the amount of cameras and frame rate you require.
https://TRENDnet.com/camerahelper...
Press and hold in the reset button on the back of the camera for approximately 10 seconds while the power is on to restore the factory default settings. ...
The top LED is a power light. It should be a steady orange light when power is applied to the camera. The bottom LED is a link light. It should be green and blinking when sending and receiving data. ...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following.
-Click Setup
-Click Basic>User
You can define th...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following.
-Click Setup.
-Click Network>Wireless.
-Click th...
Yes, the camera does support DDNS (Dynamic DNS). Dynamic DNS services will allow you to maintain a single hostname for the camera, even if your ISP changes your WAN IP address. The camera will update the DDNS record to reflect the new IP address. This ensures that each time you go to the hostn...
You will need to forward the port that the camera is using in the router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your router into your browser or add it to SecurView using the public IP address.
Refer to your rou...
Due to the heavy load placed on the CPU TRENDnet does not recommend running CPU usage over 70%.
With the following computer specs we would recommend no more than 6 cameras.
Intel Core Duo 2.5GHz, 2GB Memory, Nvidia GeForce 7100 256MB, 640 x 320 VGA view
With higher system specs you can run...
The camera is set by default for indoor lighting conditions. If the camera is placed within an environment with bright lighting please change the Light Frequency to "Outdoor". This should resolve the issue.
Open the camera's configuration page using web browser (e.g. https://192.168.10.30) and ...
| Camera Specifications | |
| Sensor de imagen | |
| Sensor | Sensor CMOS a color de 1/4 de pulgada |
|---|---|
Resolución | 640 x 480 píxeles |
Lentes Fijos | f: 4,0mm, F: 1,8 (lente IR) |
| Ángulo de visión | 64 grados |
Iluminación mínima | 0 Lux |
| Audio | |
| Entrada de micrófono | Interna omnidireccional Sensibilidad: -48 dB + 3 dB Frecuencia de respuesta: 50 ~ 16000Hz |
| Salida de audio | Enchufe de salida para altavoces de 3,5 mm |
| Formato | PCM/AMR (mono) |
| Configuración de vídeo/imagen | |
| Formato de vídeo | MPEG-4 y MJPEG |
Velocidad de imágenes | 30fps en VGA, QVGA, QQVGA |
Configuración de velocidad de imágenes | 1 ~ 30fps (imágenes por segundo) |
Configuración del índice de compresión | 5 levels |
Resolución | 640 x 480, 320 x 240, 160 x 120 |
| Zoom Digital | 3x |
Control de exposición, equilibrio de lo | Automático |
Ajuste de imágenes | Brillo, contraste y saturación ajustables |
Voltear imágenes | Vertical / horizontal |
Frecuencia de la luz | 50 Hz, 60 Hz o exterior |
| Movimiento horizontal y vertical Pan/Tilt | |
| Rango de rotación horizontal (Pan) | +165° ~ -165° |
| Rango de rotación vertical (Tilt) | +90° ~ -15° |
| Posiciones predeterminadas | 8 posiciones |
| Control | de giro hacia arriba, hacia abajo, a la derecha, a la izquierda y al centro |
| Communication | |
| LAN | 10/100Mbps Auto MDIX |
| Protocolo | TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP |
| Hardware Specifications | |
| Sistema | |
| CPU | base ARM9 |
| RAM | SDRAM de 32 Mbytes |
| ROM | Memoria flash de 8 Mbytes |
Sistema operativo | Linux |
| Requisitos del sistema (configuración Web) | |
| CPU | Pentium III a 350MHz o superior |
Tamaño de la memoria | 128 MB o superior |
Resolución | 800 x 600 o superior |
Navegador | Internet Explorer 6.0 ó superior |
Compatible con OS | Windows 2000/XP/Vista |
| Requerimientos del sistema (software SecurView™) | |
| CPU | Pentium 4 1GHz o superior |
| Tamaño de la memoria | 512MB o superior |
| Resolución | 1024 X 768 o superior |
| Compatible con OS | Windows 2000/XP/Vista |
| Físico / Ambiente | |
Tamaño | 115 x 110 x 105 mm (4,53 x 4,33 x 4,13 pulgadas) |
Peso | 330 g (11,6 oz) |
Alimentación eléctrica | Adaptador externo de alimentación eléctrica de 1,5A y 12V DC |
Consumo eléctrico | 10 vatios (máx) |
| LEDs | Corriente (naranja), enlace (verde) |
| Longitud de Onda IR | 940nm |
| Temperatura | Funcionamiento: 0°C ~ 45°C (32°F ~ 113°F) Almacenamiento: -10°C ~ 60°C (14°F ~ 140°F) |
| Inalámbrico | |
| Estándar | IEEE 802.11b/g |
| Seguridad | WEP de 64/128-bits, WPA-PSK, WPA2-PSK (TKIP/AES) |
| Antena | Conector SMA inverso desmontable de 2 dBi |
| Otros | |
| Puerto USB | USB 1.1 (type A) Up to 500mA power device with FAT16/32 format |
| GPIO | 1 entrada y 1 salida |
| Censor IR | Modo normal: 2.5 Lux Modo nocturno: 0.5 Lux on Modo habilitado para LED de luz infrarroja (IR): 0 Lux censor de luz que activa el encendido/apagado (on/off) del LED de luz infrarroja (IR): 5 Lux |
CONTENIDO DEL PAQUETE |
|
Todas las referencias a la velocidad son solo para fines comparativos. Las especificaciones, tamaño y forma del producto están sujetos a cambios sin previo aviso, y la apariencia real del producto puede diferir de la descrita en este documento.
No disponible en
