skip to main content

Convertidor de medios industrial de SFP a Gigabit UPoE

TI-UF11SFP   (Version v1.0R)

  • Convertidor reforzado de SFP a Gigabit UPoE con clasificación IP30
  • El puerto SFP admite fibra de modo sencillo o múltiple
  • Distancias de hasta 40 km de trabajo en red por fibra con el módulo SFP TI-MGBS40
  • Ofrece hasta 60W para dispositivos compatibles con PoE, PoE+ y UPoE
  • Contiene materiales de montaje en DIN-rail y en pared
  • Amplio intervalo de temperaturas de funcionamiento, de -40 a 75 ºC (de -40 a 167 ºF)
  • Protección contra sobrecarga
  • La fuente de alimentación se vende por separado (modelo: TI-S15052, TI-S15052, TI-S12048)
  • Cumple con NDAA / TAA
NDAA/TAA Compliant

DISCONTINUED PRODUCT

The TI-UF11SFP (Version v1.0R) has been discontinued. It has been replaced by the TI-UF11SFP (Version v2.0R). For a list of discontinued products, click here.

Hoja de datos

Nombre del archivo: EN_datasheet_TI-UF11SFP_(v1.0R).pdf
Fecha: 2/1/2019
Tamaño del archivo: 2.07 MB
Nombre del archivo: FR_datasheet_TI-UF11SFP_(v1.0R).pdf
Fecha: 9/29/2017
Tamaño del archivo: 2.07 MB
Nombre del archivo: GE_datasheet_TI-UF11SFP_(v1.0R).pdf
Fecha: 9/29/2017
Tamaño del archivo: 2.07 MB
Nombre del archivo: PO_datasheet_TI-UF11SFP_(v1.0R).pdf
Fecha: 9/29/2017
Tamaño del archivo: 2.07 MB
Nombre del archivo: SP_datasheet_TI-UF11SFP_(v1.0R).pdf
Fecha: 9/29/2017
Tamaño del archivo: 2.07 MB
Nombre del archivo: IT_datasheet_TI-UF11SFP_(v1.0R).pdf
Fecha: 9/29/2017
Tamaño del archivo: 2.07 MB

Guía de instalación rápida

Nombre del archivo: English_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 3.50 MB
Nombre del archivo: French_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 2.74 MB
Nombre del archivo: German_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 2.01 MB
Nombre del archivo: Portuguese_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 2.02 MB
Nombre del archivo: Spanish_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 2.01 MB
Nombre del archivo: Russian_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 2.00 MB
Nombre del archivo: Italian_TI-F11SFPTI-TI-PF11SFP-TI-UF11SFP(V1.0R)_073021.pdf
Fecha: 9/17/2021
Tamaño del archivo: 2.00 MB

Imágenes de productos

PNG Image
Tamaño del archivo: : 3.83 MB
Fecha: : 9/15/2017
PNG Image
Tamaño del archivo: : 2.52 MB
Fecha: : 9/15/2017
PNG Image
Tamaño del archivo: : 2.68 MB
Fecha: : 9/15/2017
PNG Image
Tamaño del archivo: : 3.74 MB
Fecha: : 9/15/2017
PNG Image
Tamaño del archivo: : 2.70 MB
Fecha: : 9/15/2017
PNG Image
Tamaño del archivo: : 3.82 MB
Fecha: : 9/15/2017
PNG Image
Tamaño del archivo: : 1.58 MB
Fecha: : 9/15/2017
ROHS compliant WEEE crossed-out bin symbol.
The TRENDnet TI-UF11SFP supports 802.3af, 802.3at or 802.3bt draft. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE power sourcing equipment. Many non-standard PoE devices ...
Each switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire switch. Please check detailed product specifications for PoE budget under the Products sections of our website....
Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. TX to RX and RX to TX. ...
Please refer to the user's guide for dip switch function number. When connecting two fiber converters make sure they are both set to forced mode on the fiber port. If using LLCF or LLR only one side should be enabled. ...
To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive co...
While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our fiber converters. If the third party converter adheres to specifications and also does not use proprietary measures they should be compatible. ...
The fiber connection is not auto-negotiable. You will need to pair a Gigabit fiber converter with a Gigabit fiber converter or a Fast Ethernet fiber converter with a Fast Ethernet fiber converter. ...
Normas
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3ab
  • IEEE 802.3z
  • IEEE 802.3x
  • IEEE 802.3af
  • IEEE 802.3at
  • IEEE 802.3bt draft
Interfaz del dispositivo
  • 1 puerto UPoE Gigabit
  • 1 ranura SFP de 100/1000Mbps
  • Bloque de terminales de 4 pins extraíble
  • Indicadores LED
  • Switch DIP
  • Montaje en DIN-rail
  • Montaje en pared
  • Punto de conexión a tierra
Tasa de transferencia de datos
  • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit: 2000Mbps (full duplex)
Rendimiento
  • Búfer RAM de datos: 1MB
  • Jumbo Frame: 9KB
  • Tabla de direcciones MAC: 2K
  • Componentes reforzados con clasificación para temperaturas extremas
  • Autonegociación
  • Aprendizaje automático de direcciones y control de caducidad de direcciones
Alimentación
  • Entrada: 48 -56V DC
  • Fuente de alimentación requerida: TI-S15052, TI-S15052, TI-S12048 (se vende por separado)
  • Consumo máximo: 72W
PoE
  • Pin 3, 6, 4, 5 para alimentación (+) y pin 1, 2, 7, 8 para alimentación (-)
  • Potencia disponible: 60W
Bloque de terminales
  • Entradas de alimentación y relé, 4 pins
  • Alcance del cable: 0.34 mm^2 a 2.5 mm^2
  • Cable rígido (AWG): 12-24/14-22
  • Cable trenzado (AWG): 12-24/14-22
  • Par de torsión: 5 libras – pulgada / 0.5 Nm / 0.56 Nm
  • Longitud del hilo de cable: 7-8mm
Switch DIP
  • 1: reservada, sin función
  • 2: establecer velocidad SFP a 100Mbps o 1000Mbps
MTBF
  • 510,304 horas
  • Carcasa de aluminio IP30
  • Montaje en DIN-rail
  • Montaje en pared
  • Punto de conexión a tierra
Temperatura de funcionamiento
  • -40 – 75°C (-40 – 167°F)
Humedad admitida
  • Máx. 95 % sin condensación
Dimensiones
  • 103.5 x 81.5 x 32mm (4 x 3.2 x 1.2 pulgadas)
Peso
  • 153g (5.39 onzas)
Certificaciones
  • CE
  • FCC
  • Golpes (IEC 60068-2-27)
  • Caída libre (IEC 60068-2-32)
  • Vibraciones (IEC 60068-2-6)
  • EN60950-1 (LVD)
Garantía
  • 3 años

CONTENIDO DEL PAQUETE

  • TI-UF11SFP
  • Guía de instalación rápida
  • Bloque de terminales extraíble
  • Kit de montaje en DIN-rail y pared

Todas las referencias a la velocidad son solo para fines de comparación. Las especificaciones, el tamaño y la forma del producto están sujetos a cambios sin previo aviso, y el aspecto real del producto puede diferir del que se describe en este documento.