skip to main content

10G SFP+ PCIe‑Netzwerkadapter

TEG-10GECSFP   (Version V4)

  • Wandelt einen PCI Express‑Slot in einen 10 G SFP+‑Port um
  • Unterstützt 802.1Q VLAN Tagging
  • Unterstützt 1G‑ und 10G‑SFP‑Module
  • Standard- und flache Halteklammern inbegriffen
  • Unterstützung für Windows® und Windows Server®
  • NDAA/TAA-konform (nur in den USA und Kanada)
NDAA/TAA Compliant

Drivers

  • Release Version : v1.00
  • Release Date: 2/2026
  • OS Compatibility: Windows 11, 10 (64-bit only), Windows Server 2025, 2022, 2019, and 2016

Dateiname: TEG-10GECSFP_v4_Driver.zip
SHA-1 Checksum: 7157D59AF18CFF1EBD12ACE54A26E3FFBAFD7175
Datum: 2/12/2026
Dateigröße: 4.82 MB

Datenblätter

Dateiname: EN_datasheet_TEG-10GECSFP_(v4.xR).pdf
Datum: 2/12/2026
Dateigröße: 3.31 MB
Dateiname: FR_datasheet_TEG-10GECSFP_(v4.xR).pdf
Datum: 2/12/2026
Dateigröße: 3.28 MB
Dateiname: GE_datasheet_TEG-10GECSFP_(v4.xR).pdf
Datum: 2/12/2026
Dateigröße: 3.35 MB
Dateiname: PO_datasheet_TEG-10GECSFP_(v4.xR).pdf
Datum: 2/12/2026
Dateigröße: 3.34 MB
Dateiname: SP_datasheet_TEG-10GECSFP_(v4.xR).pdf
Datum: 2/12/2026
Dateigröße: 3.33 MB
Dateiname: IT_datasheet_TEG-10GECSFP_(v4.xR).pdf
Datum: 2/12/2026
Dateigröße: 3.33 MB

Produktbild(er)

TEG-10GECSFP Product Photo (PNG Image 1)
PNG Image
Dateigröße: : 2.68 MB
Datum: : 2/12/2026
TEG-10GECSFP Product Photo (PNG Image 2)
PNG Image
Dateigröße: : 3.89 MB
Datum: : 2/12/2026
TEG-10GECSFP Product Photo (PNG Image 3)
PNG Image
Dateigröße: : 2.85 MB
Datum: : 2/12/2026
TEG-10GECSFP Product Photo (PNG Image 4)
PNG Image
Dateigröße: : 4.73 MB
Datum: : 2/12/2026
TEG-10GECSFP Product Photo (PNG Image 5)
PNG Image
Dateigröße: : 3.57 MB
Datum: : 2/12/2026
ROHS compliant Non-Disposable
Operating system support is located in the product specifications. You can find detailed product specifications on our website under the Products section....
The Switch, Router, or other network appliance you are connecting to must also support the same specifications to take full advantage of the adapters capabilities. For example, if you are connecting to a gigabit Ethernet Switch you will only connect at 1000Mbps. Connect the TEG-10GECSFP to a 10G cap...
You can find detailed product specifications on our website under the Products section.
The adapter is capable of speeds up to 10Gbps when connected to a 10Gbps SFP+ modules, and 10Gbps SFP+ port....
For 10G connections you will need to use OM3 fiber cables. Distance of the fiber cable is dependent on the SFP module it is connected to....
If the adapter is not detected by the PC make sure that it is seated firmly and properly into a PCIe 3.0 x4 interface slot and try a different slot....
Standards
  • IEEE 802.1ad
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.3ae
  • IEEE 802.3x
Hardware-Schnittstelle
  • PCIe 3.0 x4 Schnittstelle
  • 1 x 10Gbps-SFP+-Port (1Gbps / 10Gbps)
  • LED-Leuchte
Kompatibilität
  • Windows® 11, 10 (64-Bit)
  • Windows® Server 2025, 2022, 2019, 2016
Jumbo Frames
  • Bis zu 16KB
Besondere Funktionen
  • Kompatibel mit Standard‑10G‑SFP+‑Modulen und Direct‑Attach‑Copper‑(DAC)‑Kabeln (bis zu 5 m)
Weitere Unterstützung
  • 802.1Q VLAN Tagging
  • Unterstützung für LTR (Latency Tolerance Reporting)
  • Receive-Side Scaling (RSS)
  • Message Signaled Interrupts (MSI)
  • Unterstützt Wake-on-LAN
  • IP, TCP, und UDP Checksum Offloading
Leistung
  • Max. Verbrauch: 3,34W
Betriebstemperatur
  • 0° – 40° C (32° – 104° F)
Betriebsfeuchtigkeit
  • Max. 90% nicht-kondensierend
Zertifizierungen
  • CE
  • FCC
Maße
  • 86 x 63 x 18 mm (3,38 x 2,48 x 0,7 Zoll)
Gewicht
  • 48g (1,69 Unzen)
Garantie
  • 3 Jahre

PACKUNGSINHALT

  • TEG-10GECSFP
  • Standard- & Low-Profile-Halterungen

Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.