skip to main content
Click to change country

16-Port 10/100Mbit N-Way Switch für 19" Einbaurahmen

TE100-S16plus   (Version 1.0)

DISCONTINUED PRODUCT

The TE100-S16plus (Version 1.0) has been discontinued. It has been replaced by the TEG-S16Dg (Version v2.1R). For a list of discontinued products, click here.

Datenblätter

Datasheet
Dateiname: Spec_TE100-S16plus.pdf
Datum: 5/2/2013
Dateigröße: 178.22 KB
Download Email

Bedienungsanleitung

Manual
Dateiname: UG_TE100-S16plus.pdf
Datum: 8/20/2004
Dateigröße: 244.87 KB
Download
Hardware
Standards:
  • IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/100Base-FX ANSI/IEEE 802.3 NWay auto-negotiation
Connectors:
  • 16 10/100Mbps shielded RJ45 ports; one MDI-II Uplink port shared with port 8
Network Cables:
  • CAT 3, 4, 5 UTP/STP for 10Base-T; CAT 5 UTP/STP for 100Base-TX 62.5/125mm multimode fiber-optic with SC type connector (412 m in half-duplex mode, 2 Km in full-duplex mode)
Protocols:
  • CSMA/CD
Data Transfer Rate:
  • Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
  • Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Data RAM Buffers:
  • 512Kbytes per device
Filtering Address Table:
  • 16K entries per device
Internal Power Adapter:
  • 100~240 VAC, Universal Power Supply
Diagnostic LEDs:
  • Power, FX, Link/Act, FDX/COL
Dimensions:
  • 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inch) (W x H x D)
Temperature:
  • Operating: -10° ~ 50°C (14° ~ 122°F)
  • Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity:
  • Operating: 10% ~ 90% RH
  • Storage: 5% ~ 90% RH
Emission:
  • FCC Class A, CE Mark A, VCCI-A

Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.

Nicht verfügbar in