Produkt registrieren
Registrieren Sie Ihr Produkt, damit Sie hinsichtlich Produktaktualisierungen und Gewährleistungsinformationen auf dem Laufenden bleiben.
-
In mein Konto einloggen
- | Partner
- |
Deutschland (ändern)
PoE-Megapixel HD-Internetkamera für Tagund Nachtaufnahmen im Freien
TV-IP322P (Version v1.0R)
- Enges Sichtfeld für Weitsichtüberwachung
- Sichtweite bei Nacht bis zu 20 m
- Witterungsbeständigkeit gemäß Schutzklasse IP66 erlaubt Installation im Freien
- H.264 Megapixel Auflösung bis zu 1280 x 1024
- Stromversorgung über Ethernet (PoE) senkt Installationskosten
- Kostenlose Software mit Funktionen für Bewegungserkennung und E-Mail-Benachrichtigungen
Hilfsprogramme
Dateiname: SecurViewPro(2.0.0.0_20110418).zip
SHA-1 Checksum: C52595DDC53C6E6B86D81C8B53E8E5C432BE29F7
Datum
7/26/2017
7/26/2017
Dateigröße
76.92 MB
76.92 MB
Dateiname: Utility_IPSetup.zip
SHA-1 Checksum: 522A5EDEE64F05C59240326AD6FA3AB7F0C24A74
Datum
7/26/2017
7/26/2017
Dateigröße
700.00 KB
700.00 KB
Treiber/Hilfsprogramme
Web plug-in for MAC OS
Release Date: 07/2018
Release Note:
Release Date: 07/2018
Release Note:
- Updated latest Mac OS 10.12 support
Dateiname: Mac_Plugin.zip
SHA-1 Checksum: 52A5EC411C0FC29CF41C3557E08437EA83AE5B16
Datum
7/31/2018
7/31/2018
Dateigröße
3.66 MB
3.66 MB
Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Firmware Version: 1.0.4
Release Date: 9/2014
Notes:
- Support Java Applet
- Fixed Active X issue.
Note:
- Please do not save the camera's configuration file from the old firmware and restore it after the firmware upgrade.
- After a successful firmware upgrade, please reset the camera to factory default and reconfigure the camera. We strongly recommend that you change the camera's administrator's account password.
Dateiname: FW_TV-IP322P(1.0.4).zip
SHA-1 Checksum: 90005BEC17DFFC3F91EDBBDD15C806B12BBF64FD
Datum
10/1/2021
10/1/2021
Dateigröße
5.06 MB
5.06 MB
Software
Version 1.10.0
Product InformationDateiname: TRENDnetView_EVO__x64_1.10.0.zip
SHA-1 Checksum: 2B5BD0BFFF960D487E4ADFC1130AE0B64220A986
Datum
8/2/2018
8/2/2018
Dateigröße
367.72 MB
367.72 MB
Version 1.10.0
Product InformationDateiname: TRENDnetView_EVO__x86_1.10.0.zip
SHA-1 Checksum: 2963E3F4127E318913ABCDA69CB347364CB39448
Datum
8/2/2018
8/2/2018
Dateigröße
261.77 MB
261.77 MB
Datenblätter
Dateiname: EN_spec_TV-IP322P(v1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.45 MB
1.45 MB
Dateiname: FR_spec_TV-IP322P(V1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.49 MB
1.49 MB
Dateiname: GE_spec_TV-IP322P(V1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.50 MB
1.50 MB
Dateiname: PO_spec_TV-IP322P(V1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.47 MB
1.47 MB
Dateiname: SP_spec_TV-IP322P(v1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.47 MB
1.47 MB
Dateiname: RU_spec_TV-IP322P(v1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.46 MB
1.46 MB
Dateiname: IT_spec_TV-IP322P(v1.0R).pdf
Datum
3/18/2014
3/18/2014
Dateigröße
1.48 MB
1.48 MB
Kurzanleitung zur Installation
Dateiname: EuropeanQIG_TV-IP322P(V1.0R).pdf
Datum
4/4/2013
4/4/2013
Dateigröße
1.72 MB
1.72 MB
Dateiname: QIG_TV-IP322P(V1.0R).pdf
Datum
4/4/2013
4/4/2013
Dateigröße
6.42 MB
6.42 MB
Dateiname: FR_Web_TV-IP322P(1.01).pdf
Datum
8/9/2012
8/9/2012
Dateigröße
3.34 MB
3.34 MB
Dateiname: GE_Web_TV-IP322P(1.01).pdf
Datum
5/4/2011
5/4/2011
Dateigröße
2.80 MB
2.80 MB
Dateiname: PO_Web_TV-IP322P(1.01).pdf
Datum
5/4/2011
5/4/2011
Dateigröße
2.70 MB
2.70 MB
Dateiname: SP_Web_TV-IP322P(1.01).pdf
Datum
5/4/2011
5/4/2011
Dateigröße
2.80 MB
2.80 MB
Dateiname: RU_Web_TV-IP322P(1.01).pdf
Datum
5/4/2011
5/4/2011
Dateigröße
3.89 MB
3.89 MB
Dateiname: EST_Web_TV-IP322P(1.01).pdf
Datum
5/4/2011
5/4/2011
Dateigröße
2.49 MB
2.49 MB
TrendnetVIEW App Kurzanleitung zur Installation
Dateiname: TRENDnetVIEW_App_(iOS).pdf
Datum
6/24/2014
6/24/2014
Dateigröße
1.90 MB
1.90 MB
Dateiname: TRENDnetVIEW_App_(Android).pdf
Datum
6/24/2014
6/24/2014
Dateigröße
1.90 MB
1.90 MB
Bedienungsanleitung
Produktbild(er)
OverviewPlease ensure you have followed the quick installation guide and have the camera setup and accessible on your home/office network. The following instructions are going to outline how to make a SecurView camera accessible over the Internet. We will start by assigning a unique static IP addres...
The Secure Digital card will allow you to save video to it on motion detected events only.
Log in to the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Click Setup then go to the...
Yes, they can be disabled. Log in to the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Click on Setup and then go to the Basic>System page. The IR LED control can be set to "...
Yes, log into the camera and click on Setup then click on Event Server>Network Storage on the left hand side. Enter your Samba server information here.
After applying the Samba server information click on Event Config on the left hand side. You have two options, Motion Detection and Schedu...
The camera must be configured properly to have Internet access. This includes making sure you have entered a valid default gateway address for the camera and valid DNS server entries to ensure it can resolve names. ...
By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera.
Unfortunately SecurView Pro is not compatible with Macintosh operating systems.
The camera's web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering https://192.168.10.30 into the address line....
The camera by default is configured to receive an IP address via DHCP. If it is unable to receive an IP address via DHCP it will default to 192.168.10.30. You can use the IP Setup Utility to find and change the IP address of the camera as well.
...
Start the SecurView Pro application and login. The default username and password are both "admin".
Click on Device > Device Setting
Select the camera and click modify
Click the Motion Detection Area button
Define your motion detection areas. You have three areas you ca...
Download the latest firmware from https://www.TRENDnet.com/downloads/. Detailed firmware update instruction are included with the download. ...
Log into the camera and click on Setup then click on Event Server>Email on the left hand side. Enter your email server and user information here.
Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here.
After applyi...
Log into the camera and click on Setup then click on Event Server>FTP on the left hand side. Enter your FTP server information here.
After applying the FTP server information click on Event Config on the left hand side. You have two options, Motion Detection and Scheduled uploading. You also ha...
After you have the camera configured on your network start SecurView Pro. The default username and password for SecurView Pro are both "admin".
Click on the "Device" button then click "Device Settings".
Click New.
Click on the "Device Search" button.
Click Search. Sel...
The supported browsers are Internet Explorer 6.0 or above.
Remove the front cover of the TV-IP322P then press and hold in the reset button indicated below for approximately 10 seconds.
...
Log into the camera by entering the camera's IP address into your browser. The default IP address is https://192.168.10.30. The default username and password are both "admin".
Once you have logged into the camera do the following.
-Click Setup
-Click Basic>User
You can define t...
Yes, the camera does support DDNS (Dynamic DNS). Dynamic DNS services will allow you to maintain a single hostname for the camera, even if your ISP changes your WAN IP address. The camera will update the DDNS record to reflect the new IP address. This ensures that each time you go to the hostn...
You will need to forward the port that the camera is using in the router to the camera. By default this is TCP port 80. From a remote location you would enter in the public or WAN IP address of your router into your browser or add it to SecurView Pro using the public IP address.
Refer to your rout...
| Kamera | |
| Allgemein |
|
| Bild & Video |
|
| Audio |
|
| Schwenk-/Neigekopf und Zoomfunktion |
|
| Voreingestellte Positionen: 32 |
|
| GPIO |
|
| SD Slot |
|
| Hardware | |
| Netzwerk |
|
| LED |
|
| IR Wellenlänge |
|
| Rücksetztaste |
|
| Stromversorgung über Ethernet (PoE) |
|
| Stromverbrauch |
|
| Stromversorgung |
|
| Abmessungen |
|
| Gewicht |
|
| Einsatzbedingung |
|
| Zulassungen |
|
| Systemanforderungen | |
| Verwaltungsoberfläche |
|
| Für TRENDnetVIEW |
|
| TRENDnetVIEW |
|
| Netzwerkprotokolle |
|
| Ansteuerung | |
| Fernsteuerung |
|
| Backup/Wiederherstellung |
|
| Einstellungen | |
| Bild |
|
| Video |
|
| Aufnahme |
|
| Ereignisverwaltung |
|
| QoS |
|
| Port Einstellungen |
|
| Digitaler Zoom |
|
| Dynamisches DNS |
|
| Uhrzeit |
|
| SMTP |
|
| Systemprotokoll |
|
| PACKUNGSINHALT |
|
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
