4-Port Kabel/DSL-Breitband-Router
TW100-S4W1CA (Version F1)
DISCONTINUED PRODUCT
The TW100-S4W1CA (Version F1) has been discontinued. It has been replaced by the TW100-S4W1CA (Version v2.1R). For a list of discontinued products, click here.Firmware
Aktualisieren Sie die Firmware von TRENDnet-Produkten NICHT über eine drahtlose Verbindung. Wenn die Firmware über eine drahtlose Verbindung aktualisiert wird, kann das Produkt Schaden nehmen. Führen Sie Aktualisierungen deshalb bitte nur über verdrahtete Verbindungen durch. |
Date:12-16-2005
Dateiname:
Firmware_TW100-S4W1CA_ver.F1_2000248.zip
Description:
Firmware file "S4W1CA_F1_2000248.dlf", Date: 11-23-2005 TW100-S4W1CA(version: F1/F2/F3) Internet Router, Firmware version: 2.00 build 0248.
Release Note:
1.Bug fixed: after enabling "remote management" using a specific port,user still able to manage the Router using port 80.
Firmware Upgrade Instruction:
Please download and unzip the firmware file and then follow the instructionsin the "readme.txt" to upgrade the firmware.
Dateiname: Firmware_TW100-S4W1CA_ver.F1_2000248.zip
SHA-1 Checksum: 148F705F773035E45AF32770F6515D80CB92CB71
Datum: 7/28/2017
Dateigröße: 598.15 KB
Datenblätter
Dateiname: EN_Spec_TW100-S4W1CA_F1.pdf
Datum: 7/27/2006
Dateigröße: 295.62 KB
Dateiname: FR_Spec_TW100-S4W1CA_F1.pdf
Datum: 7/27/2006
Dateigröße: 301.68 KB
Dateiname: GE_Spec_TW100-S4W1CA_F1.pdf
Datum: 7/27/2006
Dateigröße: 301.16 KB
Dateiname: SP_Spec_TW100-S4W1CA_F1.pdf
Datum: 7/27/2006
Dateigröße: 298.98 KB
Dateiname: RU_Spec_TW100-S4W1CA_F1.pdf
Datum: 7/27/2006
Dateigröße: 1.24 MB
Kurzanleitung zur Installation
Dateiname: QIG_TW100-S4W1CA(english).pdf
Datum: 3/28/2005
Dateigröße: 5.79 MB
Dateiname: QIG_TW100-S4W1CA(french).pdf
Datum: 3/28/2005
Dateigröße: 5.25 MB
Dateiname: QIG_TW100-S4W1CA(german).pdf
Datum: 3/28/2005
Dateigröße: 5.41 MB
Dateiname: QIG_TW100-S4W1CA(Portuguese).pdf
Datum: 4/5/2006
Dateigröße: 2.87 MB
Dateiname: QIG_TW100-S4W1CA(spanish).pdf
Datum: 3/28/2005
Dateigröße: 6.01 MB
Dateiname: QIG_TW100-S4W1CA_F1_EST.pdf
Datum: 8/25/2006
Dateigröße: 6.70 MB
Dateiname: QIG_TE100-S4W1CA_RO.pdf
Datum: 3/3/2006
Dateigröße: 6.48 MB
Dateiname: QIG_TW100-S4W1CA(Hebrew).pdf
Datum: 1/19/2006
Dateigröße: 1.64 MB
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN then click on Advanced Setup.
Click on Firewall then DMZ on the left hand side of th...
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN then click on Advanced Setup. Next, click on NAT then Virtual Server.
Input t...
The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following:
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and ...
Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel.
Double-Click on the Network Connection icon.
Right-Click on the Local Area Connection icon then click on Properties.
Highlight the Internet Protocol (TCP/IP...
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click on LOGIN then click on Advanced Setup.
Click on LAN and then LAN Settings on the left hand side...
The default username & password for the TW100-S4W1CA is admin for the username and leave the password blank...
The default IP address for the TW100-S4W1CA is 192.168.0.1.
Locate the reset button on the back of the TW100-S4W1CA.
Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration.
...
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN and click on Advanced Setup.
Click on System on the left hand side.
If the Cu...
Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address.
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password b...
Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN and click on Advanced Setup.
Next, click on WAN, PPPoE.
Now input your Username and ...
Turn off your Cable/DSL modem, Router, PC. Then, turn on the Cable/DSL modem and wait for 60 seconds. Next, turn on the router, wait 60 seconds, and turn on your PC. This simple power cycle normally helps the router connect to your Internet connection. Then, try accessing a website such as https://w...
You can simply contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information. ...
Verify your hardware and TCP/IP settings again by reviewing the instructions in sections 1-3. Also, make sure the Power, WAN, and on the LAN lights on the Router's front panel are on. Then, try accessing https://192.168.1.1 again using your web browser....
| Hardware | |
| Standards: |
|
|---|---|
| Protokolle: | TCP/IP, NAT, PPPoE, UPnP, HTTP, DHCP Server/Client, SNTP |
| Protokoll/Topologie: | (CSMA/CD) / Star |
| Verbindungsart: | Dynamische IP, Statische (Feste) IP, PPPoE, PPTP |
| Firewall: | NAT |
| Management: | Konfiguration über Webbrowser & Fernmanagement |
| WAN: | 1 x 10/100-MBit/s-Port (Internet) |
| LAN: | 4 x 10/100 MBit/s Auto-MDIX-Ports |
| Kabel: |
|
| Datenübertragungsrate: |
|
| LEDs: | Stromversorgung, System, WAN: Link/ACT 100 M, LAN: Link/ACT, 100 MBit/s |
| Stromverbrauch: | 7 Watt (max.) |
| Abmessungen: | 165 x 114 x 44mm |
| Gewicht: | 236 g |
| Temperatur: |
|
| Luftfeuchtigkeit: |
|
| Netzteil: | 7,5 V Gleichstrom, 1A |
| Zertifizierungen: | FCC & CE |
Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.
