skip to main content
Click to change country

High Performance Plug-n-Play Ethernet Adapter

TE-PCI   (Version 1.0)

DISCONTINUED PRODUCT

The TE-PCI (Version 1.0) has been discontinued. For a list of discontinued products, click here.

Drivers

Driver (Linux)
Dateiname: Linux_TE-PCIW.zip
SHA-1 Checksum: 4CC2B5038C3C1C0D5680A919F6278C5EEDBDC810
Datum: 7/25/2017
Dateigröße: 12.46 KB
Download
Driver
Dateiname: Driver_TE-PCI.zip
SHA-1 Checksum: D08A7D4E9BA9C489B89E8FFD766933397950278F
Datum: 7/25/2017
Dateigröße: 1.11 MB
Download

Datenblätter

Datasheet
Dateiname: Spec_TE-PCI.pdf
Datum: 5/13/2013
Dateigröße: 125.87 KB
Download Email
Hardware
Standards:
  • IEEE 802.3 10Base-2 and 10Base-T
On-board Connector:
  • RJ-45 and BNC
Media Interface:
  • UTP Cat. 3, 4, 5; EIA/TIA-568 non-standard 100-ohm STP cable; RG-58A/U coaxial cable
Data Bus Supported:
  • 32-bit, PCI Local Bus Specification 2.0 (Bus Master)
IRQ's Supported:
  • Assigned by the BIOS to a free IRQ (interrupt) number
I/O Base Address:
  • Assigned by the BIOS to a free I/O address block
LAN Chipset:
  • DEC 32-bit Intelligent Ethernet interface controller
Boot ROM Size:
  • 16Kb
FCC Compliance:
  • FCC Class A certification; FCC Class B certification
CE Mark:
  • Compliance with EMI EN50081-1, EN55022, EMS EN50082-1, IEC 801-2 (ESD), IEC 801-3 (RS), IEC 801-4 (EFT)
Power Consumption:
  • 2.72W max.
Temperature:
  • Operating: 32° - 131°F (0° - 55°C)
  • Storage: -4° - 176°F (-20° - 80°C)
Operating Humidity:
  • 10 to 90%, non-condensing

Alle erwähnten Geschwindigkeiten dienen ausschließlich dem Vergleich. Produktspezifikationen, Größe und Form unterliegen unangekündigten Änderungen, und das tatsächliche Aussehen des Produkts kann von dieser Beschreibung abweichen.

Nicht verfügbar in