TRENDnet TEW-630APB Access Point : Basic / Network Settings

Network Settings

Use this section to configure the internal network settings of your Access Point and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Access Point Settings

Use this section to configure the internal network settings of your Access Point. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Get LAN IP from :
IP Address :
Subnet Mask :
Gateway :
Local Domain Name :	(optional)

DHCP Server Settings

Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network.

Enable DHCP Server :
DHCP IP Address Range :	to
Primary DNS :
Secondary DNS :
DHCP Lease Time :	(minutes)
Always broadcast :	(compatibility for some DHCP Clients)

Add DHCP Reservation

Enable :
Computer Name :	<<
IP Address :
MAC Address :

DHCP Reservations List

Enable	Computer Name	MAC Address	IP Address

Number of Dynamic DHCP Clients :