I specified the IP address, 192.168.0.1 in my internet browser, but the bowser comes back with "The page cannot be displayed". How can I get into the TW100-BRV204 web configuration page?

Please check your hardware and TCP/IP settings again by checking through section 1-3, make sure the Power, WAN, and on the LAN lights on the Router's front panel are on and the TCP/IP configurations are done properly. Then try browsing to the 192.168.0.1 again using your Internet browser.
FAQ ID: 335
Created: 2/3/2005
Modified: 2/3/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5