How should I configure the dip switches on the fiber converters?

Please refer to the user’s guide for dip Switch function number. When connecting two fiber converters make sure they are both set to forced mode on the fiber port. If using LLCF or LLR only one side should be enabled.
FAQ ID: 3291
Created: 10/25/2017
Modified: 10/25/2017
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5