Why can’t I get a link light when I plug in my network device?

Please check the following:

  1. Please make sure that the cable is seated properly on both ends.
  2. Make sure that you are using a known working cable.
  3. If possible please try plugging in a known working device in the port you are having issues with to see if the problem follows the Switch or the device.
FAQ ID: 3075
Created: 3/27/2014
Modified: 3/27/2014
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5