After successful installation of the TU2-ET100 USB Fast Ethernet, I connected my USB device into a USB slot, but it does not seem to work. What should I do?

Make sure that the CAT-5 cable is connected properly into your Switch, or broadband modem. Double check the connection at the other end of the CAT-5 cable, and verify that the cable is inserted properly into your TU2-ET100. Also, verify that your Switch or your broad-band modem is getting any power.
FAQ ID: 295
Created: 2/2/2005
Modified: 2/2/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.7)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5