Why does the KVM switch computers randomly when using VMware?

This is caused by VMware quickly changing the keyboard’s num lock and scroll lock state. This activates hot key Switching. You can prevent this by ensuring the host computer and the VMware session are both set to the same num lock and scroll lock state. Running VMware in full screen mode should also prevent this behavior.
FAQ ID: 2732
Created: 5/22/2012
Modified: 5/22/2012
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5