My powered device is not receiving power from the TPE-T80 or TPE-T160. What should I check?

Please ensure the TPE-T80 or TPE-T160 is plugged in and that the Ethernet cable is Cat5e or higher. Please also ensure the cable is a known working cable. For the TPE-T80 please also check the dip Switch on the front panel and make sure it is on.
FAQ ID: 2723
Created: 4/17/2012
Modified: 4/17/2012
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(2.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5