How do I connect to the TEW-659BRV at 300Mbps?

To connect at 300Mbps your wireless client must support 802.11n speeds up to 300Mbps as well. For 802.11n performance you will also need to use WPA2 AES encryption. Using a legacy form of encryption will cause it to fall back to legacy 802.11 modes.

Log in to the wireless Router by entering into the address line of your browser.

The default System Password is admin.

After you have logged into the Router click on Configuration > Basic Setting > Wireless. For 802.11n performance select WPA2-PSK under Authentication. For encryption select AES. Set the Pre-Shared Key. The Pre-Shared Key must be at least 8 characters long. Please remember or write this down. Any wireless device connecting to the Router will be prompted for this key.

FAQ ID: 2647
Created: 2/6/2012
Modified: 2/6/2012
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5