How do I secure my wireless network?

Log in to the wireless Router by entering into the address line of your browser.

The default System Password is admin.

After you have logged into the Router click on Configuration > Basic Setting > Wireless. For 802.11n performance select WPA2-PSK under Authentication. For encryption select AES. Set the Pre-Shared Key. The Pre-Shared Key must be at least 8 characters long. Please remember or write this down. Any wireless device connecting to the Router will be prompted for this key.

FAQ ID: 2646
Created: 2/6/2012
Modified: 2/6/2012
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5