How do I connect to the TEW-692GR at 450Mbps?

To connect at 450Mbps your wireless clients must also support 450Mbps and the Routerís channel bandwidth must be set to Auto 20/40MHz.†† For wireless security you must use WPA2 AES for 802.11n support.

Log in to the TEW-692GR by entering into the address line of your browser.

The default username and password are both ďadminĒ, without the quotes.

Click Wireless 2.4GHz or Wireless 5GHz and then Basic.† You can change the channel bandwidth here.

Click Wireless 2.4GHz or Wireless 5GHz and then Security.† Select WPA2-PSK with AES and define your pre-shared key.

FAQ ID: 2488
Created: 7/18/2011
Modified: 7/18/2011
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5