How do I secure my wireless network?

When going through the setup wizard you are prompted to setup wireless security. Use WPA2 AES encryption values for 802.11n performance. You can manually secure the wireless network by doing the following.

Login to the TEW-650AP by entering http://192.168.10.100 into the address line of your browser. If you have configured the TEW-650AP with a dynamic IP address use the current IP address assigned to it.

The default username is “admin” and there is no password by default.

After you have logged in to the TEW-650AP click on Wireless>Security. Select the SSID and define the wireless encryption values. For 802.11n performance use WPA2 AES encryption values.

FAQ ID: 2160
Created: 9/14/2010
Modified: 9/14/2010
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(2.8)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5