How come the LED's of the power, Link/ACT, and FDX/COL are on, but my FX LED's are not?

Go to one of your fiber converters, and Switch the connectors: Move the connector that was in the transmit side to the receive side, and the other connector that was in the receive side to the transmit side.
FAQ ID: 203
Created: 2/2/2005
Modified: 2/2/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(5.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5