How do I use my router as an access point only?

Step 1 Log into the Router by entering its IP address into a browser. The default IP address is http://192.168.1.1. The default username is admin with a password of admin. They are case sensitive.

Step 2 Click on “Wireless” on the left hand side then click on “Basic”.

Step 3 Select “Enable” for AP Mode

Step 4 Click Main and then click LAN & DHCP Server. Change the IP Address to be in the same subnet as your network and then click on “Apply”.

Step 5 Unplug the power to the TEW-452BRP, wait 15 seconds, then plug the power back in.

Step 6 Connect one of the ports into your existing Router.

FAQ ID: 1470
Created: 1/22/2008
Modified: 1/22/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(5.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5