How do I use my router as an Access Point only?

Step 1 Log into the Router by entering its IP address into a browser. The default IP address is The default username is admin with a password of admin.

Step 2 Click on “Main” on the left hand side then click on “LAN&DHCP Server”.

Step 3 Click on “Disable” on the “DHCP Server”. Then click on “Apply”

Step 4 Connect one of the LAN ports into your existing Router. DO NOT connect to the WAN port of the TEW-432BRP.

FAQ ID: 1440
Created: 1/21/2008
Modified: 1/21/2008
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5