How do I use my router as an Access Point only?

Step 1 Log into the Router by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username is admin with a password of admin.

Step 2 Click on “Main” on the left hand side then click on “LAN&DHCP Server”.

Step 3 Change the IP Address to be in the same subnet as your network. Select “Disable” on the “DHCP Server”. Then click on “Apply”.

Step 4 Connect one of the LAN ports into your existing Router. DO NOT connect to the WAN port of the TEW-632BRP.
FAQ ID: 1425
Created: 1/19/2008
Modified: 1/19/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend
Rate
(4.3)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5