I am unable to run the EasyGo setup on my Mac or I receive an error message after running the EasyGo setup CD. What can I do?

The EasyGo setup will only work on a Windows PC. If you want to setup the Router from a non-Windows PC or if you receive an error message,

Step 1 Connect an Ethernet cable from your modem to the WAN port on the Router.

Step 2 Connect a second Ethernet cable from your computer to one of the 4 LAN ports on the TEW-632BRP.

Step 3 Log into the Router by entering its IP address into a browser. The default IP address is The default username is admin with a password of admin. They are case sensitive.

Step 4 If the setup wizard does not appear, click on “Wizard”.

Step 5 Follow the setup wizard instructions.

FAQ ID: 1422
Created: 1/19/2008
Modified: 1/19/2008
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5