I have connected my WPS enable computer to the TEW-632BRP but how do I connect a non WPS wireless computer to it?

You would connect to it like a standard wireless network. You will be prompted for the key that was generated during the WPS connection process. You can verify the key by following the steps below:

Step 1 Log into the Router by entering its IP address into a browser. The default IP address is At the login, enter your username (admin) and password (admin).

Step 2 Click “Wireless” on the left hand side and then click “WiFi Protected Setup”.

FAQ ID: 1420
Created: 11/22/2007
Modified: 1/19/2008
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5