Login to My Account   Partners  
Click to change countryUnited States (change)
 

10-Port 2.5GBASE-T Web Smart PoE+ Switch with 2 x 10G SFP+ Slots

TPE-30102WS (Version v1.0R)
  • 8 x 2.5GBASE-T PoE+ ports with 2 x 10G SFP+ Slots
  • 2.5GBASE-T supports up to 2.5Gbps connection speeds
  • Compatible with existing Cat5e or better cabling
  • Easy to use web-based management interface
  • Supports up to 32 IPv4/IPv6 static routes
  • Supports LACP, VLAN, and IGMP Snooping
  • IEEE 802.1p QoS with queue scheduling support
  • Per port MAC restriction and dynamic ARP inspection
  • Bandwidth control per port
  • 80Gbps switching capacity
  • 1U rack mountable (brackets included)

Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3ae
  • IEEE 802.3af (15.4 Watts/port)
  • IEEE 802.3at (30 Watts/port)
  • IEEE 802.3bz
Device Interface
  • 8 x 2.5GBASE-T PoE+ ports (100Mbps/1Gbps/2.5Gbps)
  • 2 x 10G SFP+ slots (1Gbps/10Gbps)
  • 1 x RJ-45 console port
  • LED indicators
  • Reset button
Data Transfer Rate
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
  • 2.5 Gigabit Ethernet: 5Gbps (full duplex)
  • 10 Gigabit Ethernet: 20Gbps (full duplex)
Performance
  • Switch fabric: 80Gbps
  • RAM buffer: 2MB
  • MAC address table: 32K entries
  • Jumbo frames: 9KB
  • Forwarding mode: store and forward
  • Forwarding rate: 59.5Mpps (64-byte packet size)
Management
  • CLI (Console / Telnet / SSHv2) for IP address settings and password configuration only
  • HTTP / HTTPS (SSL v2/3 TLS 1.2) web based GUI
  • SNMP v1, v2c, v3
  • SNMP trap (Up to 4 receivers)
  • RMON v1/2/3/9
  • Cable diagnostic test
  • Static unicast entries
  • LLDP
  • LLDP-MED
  • IPv6 neighbor discovery, IPv6 static IP, and DHCPv6
MIB
  • MIB II RFC 1213
  • Bridge MIB IEEE8021-Q
  • RMON (Group 1,2,3,9) RFC 2819
  • Interface group MIB using SMIv2 RFC 2863
  • Multicast group membership discovery MIB RFC 5519
  • SNMP management frameworks RFC 3411
  • User-based security model for SNMPv3 RFC 3414
  • View-based access control model for SNMP RFC 3415
  • Ethernet-like MIB RFC 3635
  • 802.3 MAU MIB RFC 3636
  • LLDP-MED PoE RFC 3621
  • Entity MIB v3 RFC 4133
  • Bridge MIB RFC 4188
  • IP MIB RFC 4293
  • RADIUS authentication client MIB RFC 4668
  • RADIUS accounting MIB RFC 4670
  • LLDP-MIB IEEE802.1AB
  • PAE MIB IEEE 802.1X
Spanning Tree
  • IEEE 802.1D STP (spanning tree protocol)
  • IEEE 802.1w RSTP (rapid spanning tree protocol)
  • IEEE 802.1s MSTP (multiple spanning tree protocol)
Link Aggregation
  • Static link aggregation and 802.3ad dynamic LACP (Up to 4 groups)
Quality of Service (QoS)
  • 802.1p Class of service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: strict priority (SP), deficit weighted round robin (DWRR)
VLAN
  • Multiple management VLAN assignment
  • Asymmetric VLAN
  • 802.1Q tagged VLAN
  • Up to 32 VLAN groups, ID range 1-4094
  • Private VLAN
  • Voice VLAN (16 user defined OUIs)
Multicast
  • IGMP snooping v1, v2, v3
  • IGMP fast leave
  • Static multicast entries
  • MLD Snooping v1, v2
  • Up to 1K multicast groups
Port Mirror
  • One to one
  • Many to one
Storm Control
  • Broadcast (Min. limit: 10pps)
  • Multicast (Min. limit: 10pps)
  • Destination lookup failure (Min. limit: 10pps)
Access Control
  • 802.1X port-based network access control
  • MAC-based authentication
  • RADIUS (Up to 5 servers)
  • TACACS+ (Up to 5 servers)
  • Local dial in user authentication
  • DHCP IPv4 snooping
  • Duplicated address detection
  • Loopback detection
  • Head-of-line (HoL) blocking prevention
  • Denial of service (DoS) prevention
  • Trusted Host/IP Access List
  • Port Security/MAC address learning restriction (Up to 64 entries)
  • Destination MAC filter
  • Static/dynamic ARP inspection
ACL IPv4 & IPv6
  • MAC address
  • VLAN ID
  • ARP/RARP
  • Ether type
  • ICMP type 1-255
  • IP protocol 1-255
  • TCP/UDP port 1-65535
  • 802.1p
  • DSCP
  • IPv4/IPv6 address
  • Up to 256 entries
Layer 3 Features
  • IPv4 / IPv6 static routing
  • IP interfaces: Up to 8
  • Routing table entries: Up to 32 (IPv4 / IPv6)
  • ARP table (up to 1024 entries)
  • DHCP server, relay, option 82
  • Inter-VLAN routing
Power
  • Input: 100 - 240 V AC, 50/60 Hz
  • Max. consumption: 27.36W (No PoE load)
PoE
  • PoE budget: 240W
  • 802.3at: up to 30W per port (ports 1-8)
  • Mode A: Pins 1,2 for power+ and pins 3,6 for power- (mode A)
  • PD auto/manual classification
  • PoE port priority
  • PoE power delay
  • PoE power scheduling
  • Over current/short circuit protection
Smart Fan / Acoustics
  • Quantity: 2 (Hot swappable)
  • Noise Level: 41.7 dBA (max.)
MTBF
  • 433,898 hours
Operating Temperature
  • 0 50C (32 - 122F)
Operating Humidity
  • Max. 80% non-condensing
Dimensions
  • 330 x 230 x 44.45mm (13 x 9.1 x 1.75 in.)
  • Rack mountable 1U height
Weight
  • 2.71kg (5.98 lbs.)
Certifications
  • CE
  • FCC
  • UL
Warranty
  • 3 year

PACKAGE CONTENTS
  • TPE-30102WS
  • Quick Installation Guide
  • Power cord
  • RJ-45 to RS-232 console cable (1 m / 3.28 ft.)
  • Rackmount kit