Register your Product
Register your product to stay informed with the latest product updates and warranty information.
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
File name:
Firmware _TEW-611BRP_1.0.7.ZIP, Sept. 12, 2007
Description:
TEW-611BRP 802.11g MIMO Wireless Router, Firmware version 1.0.7.
Firmware file: "611BRP_107.bin"
Release Note:
Firmware version 1.0.7
1. Corrected “schedule” not working properly with "Access Control"
(i.e. the Access Control is still active, even the scheduled time frame had passed).
[Note]: If your Router's firmware version is 1.0.2 or earlier, please upgradeto 1.0.4, 1.0.6, and then to 1.0.7.
Firmware Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.
Warning!
Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Firmware Upgrade requires resetting the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not restore the previously saved Router "configuration file" to the new firmware. We apologize for the inconvenience.
If you need assistance performing the firmware upgrade or if you have any questions, please contact our Technical Support Team http://www.trendnet.com/support.
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Release Note:
Firmware version 1.0.4 and 1.0.6
Firmware History:
Firmware version 1.0.4
Firmware version 1.0.2
Firmware Upgrade Instruction:
Please update the firmware 1.0.4 first and then to 1.0.6
For firmware update instructions, please see User's Guide.
Hardware | |
Standards |
|
WAN | 1 x 10/100Mbps Auto-MDIX Port (Internet) |
LAN | 4 x 10/100Mbps Auto-MDIX Port |
Slide Switch | Turn On/Off Wireless LAN |
Connection Type | Dynamic IP, Static (Fixed) IP, PPPoE, PPTP, L2TP, BigPond |
NAT | 4K Configurable NAT entries; Restricted NAPT Pre-Defined Game Hosting Configurations Port Triggering for 64 Special Applications ALG Support – RTP/RTSP, AOL, FTP, ICMP, WMP/MMS, NetMeeting, SIP ALG Enable/Disable |
SPI Firewall | UP to 64 Rules for Rule-Based Firewall IP Address Ranges, Port Ranges and Schedule Cyber Attack Protection – Verified Against Over 2000 Attacks |
Internet Access Control | Policy Based Parental Controls, Time Based Internet Access, Port Range, Service Filtering, Internet Domain Restriction. URL Filtering, 20 User Defined Schedules, 252 MAC Address Filter Entries |
LED Indicator | Power, LAN1~LAN4, WAN, WLAN |
Power Adapter | 5V DC, 2A External Power Adapter |
Dimension (L x W x H) | 180 x 122 x 30 mm (6.8 x 4.6 x 1.1 inches) |
Weight | 320g (0.7 lbs) |
Temperature |
|
Humidity | Max. 90% (Non-Condensing) |
Safety & Emissions | FCC & CE |
Wireless | |
Module Technique: |
|
Frequency | 2.412 ~ 2.484 GHz |
Antenna |
|
Media Access Protocol | CSMA/CA with ACK |
Data Rate (auto fallback) |
|
Security | 64/128-bit WEP (Hex) 802.1X (EAP): WPA/WPA2/802.1x Authenticator WPA: WPA-PSK, WPA2-PSK SSID Broadcast Control, MAC Filter (252 entries), IP Filter, URL Filter, Inbound Filter (8 entries) |
Output Power |
|
Receiving Sensitivity |
|
Encryption | 64/128-bit WEP, WPA |
Channels | 1~ 11 (US), 1~13 (EU) |
PACKAGE CONTENTS |
|