DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: v1.0.0.11
Release Date: 4/2024
Release Note:
- Fixed vulnerability with update to lighttpd v1.4.54
Filename: TEW-841APBO_FW_v1.0.0.11.zip
SHA-1 Checksum: 8F9FE589C3C9EE0F8FE934B50ECDF17ED2BAE595
Date
4/23/2024
File Size
18.62 MB
Filename: EN_datasheets_TEW-841APBO_(v1.0R).pdf
Date
8/27/2019
File Size
924.44 KB
Filename: FR_datasheets_TEW-841APBO_(v1.0R).pdf
Date
8/27/2019
File Size
888.27 KB
Filename: qig_EN_TEW-841APBO_v1.0R_062619.pdf
Date
9/4/2019
File Size
5.33 MB
Filename: qig_FR_TEW-841APBO_v1.0R_062619.pdf
Date
9/4/2019
File Size
6.14 MB
Filename: qig_SP_TEW-841APBO_v1.0R_062619.pdf
Date
9/4/2019
File Size
5.99 MB
Filename: UG_TEW-841APBO_(v1).pdf
Date
12/2/2019
File Size
3.27 MB
PNG Image
File Size: 2.50 MB
Date: 8/27/2019
Download
PNG Image
File Size: 3.03 MB
Date: 8/27/2019
Download
PNG Image
File Size: 12.30 MB
Date: 8/27/2019
Download
PNG Image
File Size: 5.57 MB
Date: 8/27/2019
Download
PNG Image
File Size: 8.41 MB
Date: 8/27/2019
Download
PNG Image
File Size: 8.19 MB
Date: 8/27/2019
Download
PNG Image
File Size: 9.16 MB
Date: 8/27/2019
Download
PNG Image
File Size: 10.53 MB
Date: 8/27/2019
Download
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3ab
- IEEE 802.3az
- IEEE 802.3at
- IEEE 802.1Q
- IEEE 802.11a
- IEEE 802.11b
|
IEEE 802.11g | - IEEE 802.11n (up to 400Mbps @ 256QAM)
- IEEE 802.11ac Wave 2 (5GHz: up to 867Mbps @ 256QAM)
|
Hardware Interface | - 1 x PoE+ Gigabit LAN port (power input)
- 4 x RP-SMA (female) antenna connectors
- LED indicators
|
Features | - 802.11ac MU-MIMO Wave 2 support
- IP67 rated housing
- Concurrent dual band
- Band steering
- WiFi traffic shaping
- 802.1Q VLAN assignment per SSID
- IPv6 support (Link-Local, Static IPv6)
- LEDs on/off
- 802.11k intelligent radio resource management
- RSSI Threshold (client signal strength and connectivity control)
|
Operation Modes | - Access Point
- Client Bridge
- WDS Access Point
- WDS Bridge
- WDS Station
|
Management/Monitoring | - Web based management
- SNMP v1/v2c/v3
- STP
- Event logging
- Ping test
- Traceroute
- Nslookup
- Telnet
|
Access Control | - Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS
- MAC filter
- Maximum client limit
|
QoS | - WMM
- Bandwidth control per SSID or client
|
SSID | |
Frequency | - 2.4GHz: 2.412 – 2.462GHz
- 5GHz: 5.180 – 5.240GHz, 5.745 – 5.825GHz
|
Wireless Channels | - 2.4GHz: FCC: 1–11
- 5GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161 and 165
|
Modulation | - DBPSK/DQPSK/CCK for DSSS technique
- BPSK/QPSK/16-QAM/64-QAM/256-QAM for OFDM technique
|
Antenna Gain | - 2.4GHz: 2 x 5 dBi external
- 5GHz: 2 x 5 dBi external
|
Wireless Output Power | - 802.11a: FCC/IC: 19 dBm (max.)
- 802.11b: FCC/IC: 19 dBm (max.)
- 802.11g: FCC/IC: 19 dBm (max.)
- 802.11n (2.4GHz): FCC/IC: 19 dBm (max.)
- 802.11n (5GHz): FCC/IC: 19 dBm (max.)
- 802.11ac: FCC: FCC/IC: 19 dBm (max.)
|
Receiving Sensitivity | - 802.11a: -72 dBm (typical) @ 54 Mbps
- 802.11b: -87 dBm (typical) @ 11 Mbps
- 802.11g: -72 dBm (typical) @ 54 Mbps
- 802.11n (2.4 GHz): -67 dBm (typical) @ 400 Mbps
- 802.11n (5 GHz): -61 dBm (typical) @ 400 Mbps
- 802.11ac: -58 dBm (typical) @ 867 Mbps
|
Power | - IEEE 802.3at Type 2 PoE PD Class 4
- Max. consumption: 12.6W
|
Operating Temperature | - -22° – 60° C (-7.6° – 140° F)
|
Operating Humidity | |
Certifications | |
Dimensions | - 111 x 174 x 38mm (4.4 x 6.9 x 1.5 in.)
|
Weight | |
Warranty: | |
PACKAGE CONTENTS |
- TEW-841APBO
- 2 x Detachable 2.4GHz 5 dBi antennas
- 2 x Detachable 5GHz 5 dBi antennas
- IP67 weather rated cable gland
- Mounting hardware
- Quick Installation Guide
|
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For maximum performance of up to 867Mbps use with an 867Mbps 802.11ac wireless adapter. For maximum performance of up to 400Mbps, use with a 400Mbps 802.11n wireless adapter. Multi-User MIMO (MU-MIMO) requires the use of multiple MU-MIMO enabled wireless adapters.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.