How do I connect to my existing network using client mode?
Step 1: Insert the CD into your computer and click on Run Setup.exe. If it does not auto-run go directly your CD-ROM drive, open it and double click on Setup.exe. Step 2: Click Setup Wizard. Step 3: Read and accept the terms of the license agreement then click next. Step 4: C...
 
How do I create a WDS link between two TEW-650APB access points?
Ensure that each TEW-650APB is configured for DHCP or has been assigned unique IP addresses to prevent an IP address conflict. Both access points must be configured with the same channel and wireless encryption values. Login to the TEW-650AP by entering http://192.168.10.100 into the address ...
 
How do I reset the TEW-650AP to default settings?
Press and hold in the reset button on the bottom of the TEW-650AP for approximately 10 second while the power is on. ...
 
How do I secure my wireless network?
When going through the setup wizard you are prompted to setup wireless security. Use WPA2 AES encryption values for 802.11n performance. You can manually secure the wireless network by doing the following. Login to the TEW-650AP by entering http://192.168.10.100 into the address line of your ...
 
What is the default username and password of the TEW-650AP?
The default username is “admin”. There is no password by default.
 
What is the default IP address of the TEW-650AP?
The default IP address is 192.168.10.100.