8-Port 10G EdgeSmart Switch
TEG-7080ES (Version v1.0R)
  • 8 x 10GBASE-T ports
  • Supports 2.5G/5G NBASE-T connection speeds
  • Easy-to-use web-based management interface
  • Supports LACP, VLAN, QoS, and IGMP Snooping
  • Bandwidth control per port
  • 160Gbps switching capacity
  • IEEE 802.1p QoS with queue scheduling support
  • 1U rack mountable (brackets included)

TRENDnet’s 8-Port 10G EdgeSmart Switch, model TEG-7080ES, is a cost-effective switch solution for high-speed 10 Gigabit network connections. This EdgeSmart switch features the most commonly used managed switch features, reducing unnecessary switch complexity. The web-based management interface offers features for traffic control, VLAN, QoS, access controls, link aggregation, and monitoring. TRENDnet’s TEG-7080ES allows for simple network integration into your SMB network.

EdgeSmart Management
Provides an easy-to-use web-based GUI management for reduced switch configuration complexity and, offers a combination of more commonly used SMB management features for easy deployment.
Integration Flexibility
Managed features include access control lists, VLAN, IGMP Snooping, and QoS for flexible network integration.
High-Speed 10GBASE-T
Offers eight 10GBASE-T Ethernet ports for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB network.

Hardware Design
Provides eight 10GBASE-T ports for high-speed network connections, and 1U rack mountable.
2.5G/5G NBASE-T
Connect NBASE-T supported devices at 2.5Gbps or 5Gbps for increased throughput over Cat5e or better cabling.
Smart Fan
Smart fan saves energy by auto-adjusting the fan speed and use based on cooling needs.
IPv6 Ready
This switch supports IPv6 configuration and IPv6 neighbor discovery.
Network Management
A broad range of network configurations are supported by: 802.3ad link aggregation, 802.1Q VLAN, bandwidth controls, IGMP, loopback detection, port mirroring and 802.1p (QoS).
Troubleshooting
Traffic statistics and a convenient cable diagnostic test aid in network troubleshooting.
LED Indicators
LED indicators convey port status
Standards
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3az
  • IEEE 802.3an
  • IEEE 802.3bz
Device Interface
  • 8 x 10GBASE-T (10Gbps, 5Gbps, 2.5Gbps, 1Gbps, 100Mbps)
  • 1 x RJ-45 console port
  • LED indicators
  • LED on/off button
  • Reset button
Data Transfer Rate
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2Gbps (full duplex)
  • 2.5 Gigabit Ethernet: 5Gbps (full duplex)
  • 5 Gigabit Ethernet: 10Gbps (full duplex)
  • 10 Gigabit Ethernet: 20Gbps (full duplex)
Performance
  • Switch fabric: 160Gbps
  • RAM buffer: 2MB
  • MAC Address Table: 16K entries
  • Jumbo Frames: 9KB
  • Forwarding rate: 119Mpps (64-byte packet size)
Management
  • CLI (Console) for IP address settings and password configuration only
  • HTTP / HTTPS (SSL v2/3 TLS 1.2) web based GUI
  • Enable/disable 802.3az Power Saving
  • Cable diagnostic test
  • IPv6: IPv6 Static IP
Link Aggregation
  • Static link aggregation and 802.3ad dynamic LACP (Up to 4 groups)
Quality of Service (QoS)
  • 802.1p Class of Service (CoS)
  • Bandwidth Control per port
  • Queue Scheduling: Strict Priority (All-High-Before-Low), Weighted Round Robin (WRR)
VLAN
  • 802.1Q Tagged VLAN
  • Asymmetric VLAN
  • Up to 16 VLAN groups, ID Range 1-4094
Multicast
  • IGMP Snooping v1, v2
Port Mirror
  • One to one
  • Many to one
Access Control
  • Loopback Detection
  • Trusted Host/IP Access List
Minimum Cable Requirements
  • 10GBASE-T (10Gbps): Cat 6 twisted pair @ 55 m / 180 ft. (max.) / Cat 6a or Cat 7 twisted pair @ 100 m / 328 ft. (max.)
  • NBASE-T (5Gbps): Cat 6 twisted pair @ 100 m / 328 ft. (max.)
  • NBASE-T (2.5Gbps): Cat 5e twisted pair @ 100 m / 328 ft. (max.)
  • 1000BASE-T (1Gbps): Cat 5e twisted pair @ 100 m / 328 ft. (max.)
  • 100BASE-TX (100Mbps): Cat 5 twisted pair @ 100 m / 328 ft. (max.)
Power
  • Input: 100 240V AC, 50/60Hz, internal power supply
  • Output: 12V DC, 3.5A
  • Max. Consumption: 28.5W
Smart Fan / Acoustics
  • Quantity: 2
  • Noise Level: 39.5 dBA (max.)
MTBF
  • 207,390 hours
Operating Temperature
  • 0 50 C (32 122 F)
Operating Humidity
  • Max. 90% non-condensing
Dimensions
  • 330 x 230 x 44mm (13 x 9 x 1.73 in.)
  • Rack mountable 1U height
Weight
  • 2.31kg (5.01 lbs.)
Certifications
  • CE
  • FCC
Warranty
  • 3 year
PACKAGE CONTENTS
  • TEG-7080ES
  • Quick Installation Guide
  • Power cord
  • RJ-45 to RS-232 console cable (1 m / 3.28 ft.)
  • Rackmount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.