skip to main content
TRENDnet Store
Click to change country

Outdoor Arrestor Kit

TEW-ASAK (Version 2.0R)

  • Ensure protection from unpredictable weather conditions
  • Multiple lightning strike and bi-directional protection
  • Save repair expenses; no need to replace equipment after a lightning strike
DISCONTINUED PRODUCT
The TEW-ASAK (Version 2.0R) has been discontinued. For a list of discontinued products, click here.

The Outdoor Arrestor Kit provides lightning protection for your wireless equipment. By adding a simple arrestor to your wireless antenna, you can reduce the costs in damaged switches, access points, or other network devices. Simply connect the Outdoor Arrestor Kit directly inline between your Access Point and your outdoor antenna cable, and connect the ground wire to a ground pole.

  • Supports dual band 2.4GHz 802.11b/g/n and 5GHz 802.11a wireless devices
  • Multi-strike capability and bi-directional protection helps protect devices from the erratic and unpredictable nature of lightning
  • Color coded cable and adapter sleeves ensure easy installation
  • Easy-to-install wall mounting
  • No configuration or installation software required
  • 3-year limited warranty
Surge Arrestor
Electrical Specifications
Frequency Range
  • DC ~ 6GHz
Tensile Strength
  • 50Kg
VSWR
  • 2.0:1 max ( DC ~ 6GHz )
Insertion Loss
  • -1.2dB max (DC ~ 6GHz )
DC Breakdown Voltage
  • 90V + 20%
Impulse Discharge Voltage
  • 5KA min (wave 8/20 μs)
  • 10KV min (wave 1.2/50 μs)
Impedance
  • 50Ω
Insulation Resistance
  • DC 50V > 10000MΩ
Mechanical Specifications
Connector Interface
  • N-Type male to Reverse SMA female
Body Material (Arrestor)
  • Copper
Temperature
  • - 20°C ~ 70°C (-4°F ~158°F)
Surge Arrestor
  • Embedded with 60cm extension cable
Weight
  • 200g (7.05oz.)
Grounding Wire Cable Specification
Grounding Wire Cable
  • 18 AWG
Rating Voltage
  • 600V
Rating Temperature
  • 105°C (221°F)
Conductor Resistance
  • 6.64 MΩ/KFT 20°C
Insulation Resistance
  • 2.5 MΩ/KFT 20°C, in water
Voltage Withstand Test
  • 2 KV/min, in water
Cable Convertor
Extension Cable
Inner Conductor (Solid BCCS)
  • 0.94 mm (0.037 in.)
Dielectric (Foam PE)
  • 2.79 mm (0.110 in.)
Outer Conductor (Aluminum Tape)
  • 2.95 mm (0.116 in.)
Overall Braid (Tinned Copper)
  • 3.53 mm (0.139 in.)
Jacket (PE)
  • 4.95 mm (0.195 in.)
Bend Radius: Installation
  • 12.7 mm (0.5 in.)
Bend Radius: Repeated
  • 50.8 mm (2.0 in.)
Bending Moment
  • 0.27 N-m (0.2 ft-lb)
Weight
  • 0.03 kg/m (0.021 lb/ft)
Tensile Strength
  • 18.2kg (40lb)
Flat Plate Crush
  • 0.27 kg/mm (15 lb/in.)
Cut-off Frequency
  • 41GHz
Velocity of Propagation
  • 0.8
Dielectric Constant
  • 1.56
Time Delay
  • 4.17 nS/m (1.27 nS/ft)
Impedance
  • 50 ohms
Capacitance
  • 80.3 pF/m (25.4 pF/ft)
Inductance
  • 0.21 uH/m (0.064 uH/ft)
Shielding Effectiveness
  • 90dB
DC Resistance (Inner Conductor)
  • 24.9 ohms/km
  • (7.6 ohms/1000ft)
DC Resistance (Outer Conductor)
  • 16.1 ohms/km
  • (4.9 ohms/1000ft)
Voltage Withstand
  • 1000 Volts DC
Jack Spark
  • 3000Volts RMS
Peak Power
  • 2.5KW
Storage Temperature Range
  • -70° C ~ 85° C
  • (-94° F ~ 185° F)
Operating Temperature Range
  • -40° C ~ 85° C
  • (-40° F ~ 185° F)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.