skip to main content
TRENDnet Store
Click to change country

Single Channel PoE Analog to IP Video Encoder

TV-VS1P (Version v1.0R)

  • Provides advanced IP-based functionality to an analog CCTV camera
  • View a CCTV camera from any Internet connection and on compatible mobile phones
  • No need to install this device near a power source, power and data are received through a single Ethernet cable
  • Motion detection recording, email alerts, and alarm triggers
  • Schedule recording sessions to a server with Samba client support
DISCONTINUED PRODUCT
The TV-VS1P (Version v1.0R) has been discontinued. For a list of discontinued products, click here.

TRENDnet's Single Channel PoE Analog to IP Video Encoder, model TV-VS1P, provides advanced IP-based camera functionality to a traditional analog CCTV camera. Convert analog video to digital; view video over any internet connection; record video to a server; and manage motion detection recording and email alerts. No need to install this device near a power source, power and data are received through a single Ethernet cable.

The TV-VS1P converts analog video to resolutions of up to 704 x 480 pixels (4CIF) at 30 frames per second for H.264, MPEG-4, or MJPEG compressed video. Two-way audio support facilitates audio recording and two-way communications. Remote Pan/Tilt/Zoom and Auto Patrol is supported for Pelco D compliant PTZ cameras. Advanced features include motion detection recording, email alerts, scheduled recording sessions, 3GPP support, Samba client support, Input/Output ports to network to alarm systems, date-and-time and other text overlays, mask overlays to conceal sensitive areas, an SD card slot, and digital zoom. This compact device can be mounted on most surfaces.

  • IEEE 802.3af PoE compliant device
  • 1 x 10/100Mbps PoE Auto-MDIX RJ-45 port
  • Optional power port for non-PoE installations
  • SD/SDHC card slot *
  • BNC video out and video in connectors
  • Audio support: built-in Audio jacks for additional 3rd party microphone and speaker
  • Input/Output ports (GPIO) to network to alarm systems
  • Diagnostic Power and Link LEDs
  • Four installation mounting points
  • 3x digital zoom
  • Pelco D and Pelco P pan/tilt/zoom support: Define Auto-Patrol pan tilt with up to 32 viewing nodes
  • High quality H.264, MPEG-4, and MJPEG video recording
  • Resolution up to 704 x 576 pixels and up to 30 frames per second (fps)
  • Stream Network camera video to a 3GPP compatible wireless device
  • Dynamic DNS support
  • Images controls: brightness, saturation, contrast, Hue ,and Wide Dynamic Range Correction (WDRC)
  • Time, date, and other text overlays
  • Mask overlays conceal sensitive areas
  • Supports TCP/IP networking, SMTP Email, HTTP, and other Internet protocols
  • Recording type: continuous, schedule, or motion detection
  • Record streaming video to your computer or Network Storage device with Samba support
  • Three motion detection windows with just-in-time snapshot , motion detection triggered email alerts, and image upload to FTP
  • Event trigger: motion detection or Input/Output signal
  • Event response: email alert, instant snapshot, or video recording
  • Send instant messages to Jabber client via Jabber Server
  • Supports Quality of Service (QoS) with Differentiated Services Code Point (DSCP)
  • Quick Universal Plug and Play (UPnP) installation
  • 3-year limited warranty

* SD/SDHC card sold separately

General
Video
  • Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms; BNC connecter
  • Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
Audio
  • Line Input: 3.5mm jack (CCTP audio)
  • Line Output: 3.5mm jack (Speaker)
  • Format: PCM/AMR
  • 2 Way audio supported
GPIO
  • Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
SD Slot
  • Supports SD/SDHC (up to 32GB)
Pan/Tilt/Zoom
  • Protocol: Pelco D and Pelco P32 presetsAuto Patrol
Hardware
Network
  • IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIXIEEE 802.3af PoE
LED
  • Power, Link
Reset Button
  • Push and release to rebootPush and hold for 5 seconds to restore to factory default
Power Consumption
  • 7 Watts
Power
  • 12V, 1.5A external power adapter (for non-PoE installation)
Dimension
  • 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
Weight
  • 445 g (15.7 oz.)
Temperature
  • Operating: 0°C ~ 45°C (32°F ~ 113°F)
  • Storage: -15°C ~ 60°C (5°F ~ 140°F)
Humidity
  • Max. 85% (non-condensing)
Certifications
  • CE, FCC
Requirement
Management Interface
  • Internet Explorer 6.0 or above
To run Utility
  • Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
Network Protocols
  • TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP
Management
Remote
  • Remote management supported
Backup / Restore
  • Save/retrieve configuration files
Settings
Image
  • Brightness, contrast, saturation, mirror (horizontal/vertical)
Video Encoder
  • Encoding type: H.264, MPEG4, MJPEGResolution/frame rate(auto-sensing)704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
  • 704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)
  • Compression: 5 levels
Recording
  • Recording type: continuous, schedule, or motion detection
Port Settings
  • HTTP port: 80 (default), RTSP (554)
Digital Zoom
  • 3x
Dynamic DNS
  • Yes
Time
  • Synchronize with NTP server or set time/date manually
SMTP
  • Supported up to 2 destination accounts
System Log
  • 100 items

PACKAGE CONTENTS
  • TV-VS1P
  • Multi-language Quick Installation Guide
  • CD-ROM (Utility & User's Guide)
  • Network cable (1.8 m / 6 ft.)
  • GPIO Connector
  • Audio and cable (3.5 mm)
  • Power adapter (12 VDC, 1.5 A)
  • Mounting accessories

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in