TRENDnet | Support | FAQ | TFC-1000MGA | How do I set the dip switches on the TFC-1000MGA?
How do I set the dip switches on the TFC-1000MGA?
FAQ ID: 2545   Updated: 10/11/2022 6:29:13 PM

Switch settings

There is a two pin DIP Switch on the module which is defined as Switch 1 and Switch 2:

Switch 1 LLCF
On LLCF Enabled
Off LLCF Disabled
Switch 2 Fiber mode Switch
On Forced mode
Off Auto-negotiation mode 

Note: When connecting 2 TFC-1000MGA's together Switch 2 must be the configured the same.


Was this information helpful?
Related FAQs:
Attachments:
No attachments found.