TRENDnet | Support | FAQ | I got an error when running the EasyGo setup. What can I do?
I got an error when running the EasyGo setup. What can I do?
FAQ ID: 1442   Updated: 1/21/2008 10:55:30 PM

The EasyGo setup will only work on a Windows PC.  If you want to setup the Router from a non-Windows PC, follow the steps below.

Step 1 Connect an Ethernet cable from your modem to the WAN port on the Router.

Step 2 Connect a second Ethernet cable from your computer to one of the 4 LAN ports on TEW-432BRP.

Step 3 Log into the Router by entering its IP address into a browser.  The default IP address is https://192.168.10.1. The default username is admin with a password of admin.  They are case sensitive.

Step 4 If the setup wizard does not appear, click on "Wizard"

Step 5 Follow the setup wizard instructions.


Was this information helpful?
Related FAQs:
Attachments:
No attachments found.