Step 1 Open your web browser and type the IP address of the TV-IP300(w) in the address bar. The default IP address is 192.168.0.30.

Step 2 Click on “System Administration”.

Step 3 Click on the System link at the top of the page. Fill in the SMTP section and click save.

Note: The second SMTP server is a back up. It does not send emails to both addresses simultaneously.  If the first one fails it will attempt to send the email out to the second account.

Step 4 Click on the Application link at the top of the page and place a check mark in “Send snapshot image by email” next to the Motion detection section then click save.