Search FAQs
Browse by Product
How do I create a link between two points using fiber converters?
FAQ ID: 3290 Product: TI-UF11SFPUpdated:10/25/2017 9:45:53 AM
To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive connectors will be inverted on the other side. TX to RX and RX to TX.

Was this information helpful?
Related FAQs:
Attachments:
No attachments found.