Search FAQs
Browse by Product
How do I configure a VPN tunnel when one side has a dynamic IP address?
FAQ ID: 751 Product: TW100-BRV204Updated:1/30/2006 5:09:36 PM
Use the following screenshots as a guide
Scenario
PC1 (192.168.1.x)-BRV204 (dynamic) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x.
Important Note:
1. Please match Local/Remote Identity
2. Please match the Pre-Shared Key
3. Please match the Authentication and Algorithm
4. Dynamic side would be the Initiator for Direction
5. Static IP side would be the Responder for Direction
6. When there is a dynamic connection, it would be Aggressive Mode for Exchange Mode
Settings on BRV204
Settings on BRV304
Related FAQs:
- How do I connect using a the Microsoft VPN Client?
- How do I forward ports in my TW100-BRV204/304?
- How do I configure a VPN tunnel with both sides having static IP addresses?
- I specified the IP address, 192.168.0.1 in my internet browser, but the bowser comes back with "The page cannot be displayed". How can I get into the TW100-BRV204 web configuration page?
- What is the default username and password for the TW100-BRV204/304?
Attachments:
No attachments found.