TRENDnet's AC1200 WiFi Range Extender, model TEW-822DRE, offers extreme wireless coverage to minimize existing wireless network dead spots. Setup takes minutes with no drivers to install and it stays out of the way by plugging directly into an outlet. Connect to either an existing WiFi N or WiFi AC router and extend concurrent WiFi N and AC networks into an area with little to no wireless signal.
WiFi Everywhere
High performance WiFi amplifiers and external antennas broadcast strong AC1200 WiFi into areas with low or no coverage.
WiFi Performance
All home WiFi devices are supported by concurrent 867 Mbps WiFi AC and 300 Mbps WiFi N networks.
Beamforming = Better
Beamforming increases real-time performance by directing stronger wireless signals to each device's specific location.
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3az
- IEEE 802.11a
- IEEE 802.11ac (up to 867 Mbps)
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (up to 300 Mbps)
|
Device Interfaces | - Gigabit Ethernet port
- WPS Button
- AP / Extender / Off switch
- LED indicators
- Power plug
- A: North America Type B (NEMA 5–15)
- EU: Euro Type C (CEE 7/16)
- UK: United Kingdom Type G (BS 1363)
|
Operation Modes | - Range Extender (Repeater)
- Access Point
|
Special Features | - High power amplifier
- MIMO antenna technology
- Compact form factor
- IPv6 (Link local, Static, SLAAC / DHCPv6)
- Beamforming
- Multiple SSID
- DFS channels
|
SSID | |
Access Control | - Wireless encryption: WEP, WPA / WPA2-PSK, WPA / WPA2-RADIUS
- MAC filter
- Wireless user number limitation
|
Frequency | - FCC: 2.412 - 2.462 GHz, 5.180 - 5.240 GHz, 5.745 - 5.825 GHz
- ETSI: 2.412 - 2.472 GHz, 5.180 - 5.580 GHz, 5.660 - 5.700 GHz
|
Wireless Channels | - 2.4 GHz: FCC: 1-11; ETSI: 1-13
- 5 GHz: FCC: 36, 40, 44, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48, (52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140)**
|
Modulation | - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with OFDM
|
Antenna Gain | - Dipole dual band antennae x 2
- 5G: 3 dBi
- 2.4G: 2 dBi
|
Wireless Output Power (EIRP) / Receiving Sensitivity | - 802.11a: FCC: 22 dBm (typical), CE: 20 dBm (typical) / -65 dBm (typical) @ 54 Mbps
- 802.11b: FCC: 20 dBm (typical), CE: 20 dBm (typical) / -83 dBm (typical) @ 11 Mbps
- 802.11g: FCC: 27 dBm (typical), CE: 20 dBm (typical) / -65 dBm (typical) @ 54 Mbps
- 802.11n: FCC: 27 dBm (typical), CE: 20 dBm (typical) / -61 dBm (typical) @ 300 Mbps
- 802.11ac: FCC: 26 dBm (typical), CE: 20 dBm (typical) / -51 dBm (typical) @ 867 Mbps
|
Power | - Input: 100 - 240 V AC, 50/60 Hz
- Consumption: 8.3 Watts (Max.)
|
Operating Temperature | |
Operating Humidity | |
Certifications | |
Dimensions | - 150 x 130 x 60 mm (5.9 x 5.1 x 2.4 in.)
|
Weight | |
Warranty | |
PACKAGE CONTENTS |
- TEW-822DRE
- Multi-Language Quick Installation Guide
- CD-ROM (User's Guide)
|
*For maximum performance of up to 867 Mbps use with an 802.11ac wireless client. Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions
**Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.