10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit

TEW-740APBO2K (Version v2.0R)

Wireless N300 point-to-point networking (2.4 GHz)
2 x preconfigured Wireless N access points
IPX6 outdoor weather rated housing
Built-in 10 dBi directional antenna

DISCONTINUED PRODUCT

The TEW-740APBO2K (Version v2.0R) has been discontinued. It has been replaced by the TEW-740APBO2K (Version v3.0R). For a list of discontinued products, click here.

TRENDnet's 10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit, model TEW-740APBO2K, provides Wireless N300 point-to-point connectivity. This preconfigured kit provides installers the simplest way to create a long distance wireless point-to-point bridge. Conveniently link two locations together with wireless N speed and performance.

Preconfigured Point-to-Point Bridge

Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit

The setup shows a power adapter and LAN cables connecting to a device. On the left, a device has ports labeled for power and data output with a magnified view highlighting these ports. On the right, a power adapter features a port for power adapter input and two LAN ports for data input, with cables indicating where they should be plugged in.

PoE Power Adapter

Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 20 m (66 ft.)

Water drops symbols and a label indicating IPX6 rating.

Outdoor Ready

Durable enclosure with an IPX6 outdoor weather rating

The illustration shows a TRENDnet device with labeled components. The device appears to be an outdoor-rated network device with various ports and indicators. The left side of the image shows the front bottom view of the device, while the right side shows the back bottom view with detailed labels for each component. The labels include outdoor-rated, LED indicators, 10/100 Mbps port, reset button, 10/100 Mbps PoE port, and grounding point.

Preconfigured Kit

Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit

Wireless N300 (2.4 GHz)

Compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps*

Outdoor Rated

Durable enclosure with an IPX6 outdoor weather rating

Directional Antenna

Built-in 10 dBi directional antenna

PoE Power Adapter

Proprietary PoE power adapter included

Mounting Hardware

Pole and wall mount hardware included

LED Indicators

LEDs convey wireless link quality in WISP mode

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1X IEEE 802.11d IEEE 802.11e IEEE 802.11f IEEE 802.11h IEEE 802.11i IEEE 802.11b IEEE 802.11g IEEE 802.11n (2.4 GHz up to 300 Mbps) IEEE 802.11r IEEE 802.11k
Hardware Interface	1 x 10/100 Mbps LAN1 port (proprietary PoE max. cable length 20 m (66 ft.)) 1 x 10/100 Mbps LAN2 port LED indicators Reset button Grounding Point
Special Features	IPX6 weather rated 802.1Q VLAN assignment per SSID Schedule radio on/off time policy 802.11r / 802.11k fast roaming Preconfigured point-to-point bridge kit
Access Control	Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-Enterprise, 802.1X Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting 802.1Q VLAN Authentication 2.0 / Walled Garden for guest authentication Customizable captive portal for guest authentication WMM
Operation Modes	Access Point (AP) Access Point (AP) + WDS Wireless Distribution System (WDS) WISP (CPE) + AP Client Bridge + AP Router Control AP (CAP)
SSID	Up to 7 SSIDs
Internet Connection Types (WISP (CPE) + AP & Router modes)	Dynamic IP (DHCP) Static IP (Fixed) PPPoE (Dynamic IP/Static IP) PPTP (Dynamic IP/Static IP)
Management/Monitoring	Local/remote web based management (HTTP, HTTPS) Local/remote CLI based management (Telnet, SSH) SNMP v2c/v3 SNMP Trap Upgrade firmware Backup/restore configuration Event logging Authentication log Reboot Restore to factory defaults Ping test Traceroute LED Control
Frequency	FCC: 2.412 - 2.462 GHz ETSI: 2.412 – 2.472 GHz IC: 2.412 - 2.462 GHz
Wireless Channels	FCC: 1-11 ETSI: 1-13
Modulation	802.11b: DBPK, DQPSK, CCK with DSSS 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol	CSMA/CA with ACK
Antenna Gain	10 dBi internal sector antenna
Wireless Output Power/Receiving Sensitivity	802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.4 dBm (max.), IC: 28 dBm (max.)/-88 dBm (typical) @ 11 Mbps 802.11g: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.5 dBm (max.), IC: 26 dBm (max.)/- 74 dBm (typical) @ 54 Mbps 802.11n: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.6 dBm (max.), IC: 26 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
Power	Input: 100 – 220 V, 50 - 60 Hz, 0.5 A Output: 12V / 1A Consumption: 13.5 Watts Max.
Operating Temperature	-20 - 60° C (-4 - 140° F)
Operating Humidity	Max. 99 % non-condensing
Certifications	CE FCC
Dimensions	195 x 118 x 61 mm (7.6 x 4.6 x 2.4 in.) per access point
Weight	320 g (0.7 lbs.) per access point
Warranty	3 year

PACKAGE CONTENTS

2 x TEW-740APBO
CD-ROM (User's Guide)
Quick Installation Guide
Mounting hardware
Proprietary PoE injectors
Power adapters (12 V DC, 1 A)
Grounding wires

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in