Nombre del archivo: EN_datasheet_TEG-S708_(v2.0R).pdf
Fecha
9/14/2023
Tamaño del archivo
2.21 MB
Nombre del archivo: FR_datasheet_TEG-S708_(v2.0R).pdf
Fecha
9/14/2023
Tamaño del archivo
2.21 MB
Nombre del archivo: GE_datasheet_TEG-S708_(v2.0R).pdf
Fecha
9/14/2023
Tamaño del archivo
2.21 MB
Nombre del archivo: PO_datasheet_TEG-S708_(v2.0R).pdf
Fecha
9/14/2023
Tamaño del archivo
2.21 MB
Nombre del archivo: SP_datasheet_TEG-S708_(v2.0R).pdf
Fecha
9/14/2023
Tamaño del archivo
2.21 MB
Nombre del archivo: IT_datasheet_TEG-S708_(v2.0R).pdf
Fecha
9/14/2023
Tamaño del archivo
2.22 MB
Nombre del archivo: QIG_TEG-S708 (v2.xR)_062823.pdf
Fecha
9/14/2023
Tamaño del archivo
3.88 MB
PNG Image
Tamaño del archivo: 3.68 MB
Fecha: 9/14/2023
Descargas
PNG Image
Tamaño del archivo: 3.37 MB
Fecha: 9/14/2023
Descargas
PNG Image
Tamaño del archivo: 2.98 MB
Fecha: 9/14/2023
Descargas
You will need to be running Cat-6a or higher cabling for 10GBASE-T.
Please check your network adapter's specification and make sure that it supports 2.5 Gbps.
Also, check if your network cable is Cat-5e or higher.
...
All ports on the TEG-S708 support Auto-MDIX. All ports can be used as an uplink port.
To share an Internet connection you will need a Router. The TEG-S708 can be utilized to expand the available ports on your existing Router or network....
The TEG-S708 supports jumbo frames up to 12KB.
The TEG-S708 is a non-manageable Switch. It is not configurable.
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Estándares | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3an
- IEEE 802.3bz
|
Interfaz del dispositivo | - 8 puertos 10GBASE-T (1Gbps/2,5Gbps/10G)
- Indicadores LED
|
Tasa de transferencia de datos | - Ethernet Gigabit: 2000 Mbps (full duplex)
- 2,5 Gigabit: 5Gbps (full duplex)
- 10 Gigabit: 20Gbps (full duplex)
|
Velocidad y distancia | - Cableado Cat5e: 1Gbps a 100 m (328 pies)
- Cableado Cat6: 10Gbps a 50 m (164 pies)*
- Cableado Cat6a: 10Gbps a 100 m (328 pies)*
|
Rendimiento | - Capacidad de conmutación: 160Gbps
- Búfer RAM de datos: 1.5MB
- Tabla de direcciones MAC: Entradas 16 K
- Tasa de reenvío: 115.9 Mpps (tamaño de paquetes de 64 bytes)
- Jumbo Frames: 12KB
|
Características especiales | |
Alimentación | - Entrada: 100 – 240V AC, 50/60Hz, 2.0A
- Consumo máximo: 34.128W
|
Ventilador y acústica | - Cantidad: 1
- Nivel de ruido máx.:55 dBA
|
MTBF | |
Temperatura admitida | - 0° – 40° C (32° – 104° F)
|
Humedad admitida | - Máx. 90% sin condensación
|
Dimensiones (largo x ancho x alto) | - 264 x 184 x 43mm (10.39 x 7.24 x 1.69 pulgadas)
|
Peso | |
Certificaciones | |
Garantía | |
CONTENIDO DEL PAQUETE |
- TEG-S708
- Guía de instalación rápida
- Cable de corriente (1.5m / 4.9 pies)
|
Todas las referencias a la velocidad son solo para fines de comparación. Las especificaciones, el tamaño y la forma del producto están sujetos a cambios sin previo aviso, y el aspecto real del producto puede diferir del que se describe en este documento.