Industrial SFP to Gigabit PoE++ Media Converter (95W)

The TRENDnet TI-UF11SFP supports 802.3af, 802.3at or 802.3bt. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE power sourcing equipment. Many non-standard PoE devices use pa...

Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website....

Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. TX to RX and RX to TX....

Please refer to the user's guide for dip Switch function number. When connecting two fiber converters make sure they are both set to forced mode on the fiber port....

To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive co...

While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our fiber converters. If the third party converter adheres to specifications and also does not use proprietary measures they should be compatible....

The fiber connection is not auto-negotiable. You will need to pair a Gigabit fiber converter with a Gigabit fiber converter or a Fast Ethernet fiber converter with a Fast Ethernet fiber converter....