skip to main content
Click to change country

5-Port Industrial Fast Ethernet DIN-Rail Mini Switch

TI-ELC50 (Version V2)

  • 5 x 10/100Mbps ports
  • Hardened IP50 rated metal mini switch
  • Extreme operating temperature range of -40° – 75° C (-40° – 167° F)
  • 1Gbps switching capacity
  • Includes DIN-Rail mount and wall mount brackets
  • Power supply sold separately (model: TI-M6024)
  • NDAA / TAA compliant (U.S. and Canada only)
NDAA/TAA Compliant

TRENDnet’s 5-Port Industrial Fast Ethernet DIN-Rail Mini Switch, model TI-ELC50, is a reliable and rugged networking solution designed for use in both extreme and demanding environments. This industrial Fast Ethernet DIN-Rail mini switch features a rugged IP50 rated metal enclosure, and is designed to withstand a high degree of vibration and shock, while operating in both high and low temperatures for industrial environments within -40° – 75° C (-40° – 167° F). The hardened industrial switch features five Ethernet ports for stable device connections. The mini-sized housing is designed to fit into most compact installation areas.

Two laptops are connected through a central network switch with icons for email, cloud, video, music, documents, and social media flowing between them, representing high-speed data transfer.

Fast Ethernet Ports

Up to 200Mbps full-duplex per port and total switching capacity of 1Gbps.

Four quadrants display device features with icons for vibration resistance, temperature tolerance, electrical protection, and IP50 dust protection, each marked with a check to indicate compliance.

Industrial Hardened Design

Equipped with a rugged IP50 rated housing, designed to withstand a high degree of vibration and shock, and operate within an extreme temperature range of -40° – 75° C (-40° – 167° F).

Network switch Ethernet ports and a green terminal block is shown above a stylized hand graphic, set against a blue gradient background to highlight its compact footprint and space-saving design.

Mini Design

With a compact metal housing design, this mini network switch is well-suited for installations into most environments. Its fanless design is perfect for quiet environments that require silent operation.

Top section shows the TI-ELC50 Ethernet switch mounted on a DIN rail with five 10/100Mbps ports, LED indicators, grounding point, and a removable terminal block. Bottom section depicts a warehouse layout with shelves, boxes, and a forklift, where a PoE camera connects through an injector to the switch, which is powered by a nearby supply inside a control room.

Fast Ethernet Ports

Up to 200Mbps full-duplex per port and total switching capacity of 1Gbps

DIN-Rail & Wall Mount

IP50 rated metal enclosure on the industrial switch, with included DIN-Rail and wall mount hardware

Mini Housing Design

Compact and sturdy metal housing

Operating Temperature Range

An operating temperature range of -40° – 75° C (-40° – 167° F) allows for the installation of the industrial switch in environments with extreme hot or cold conditions

Shock and Vibration Resistant

Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)

Electro Magnetic Compliance

Complies with industrial EMS certifications (IEC 61000-4-2) ESD: Contact: 6kV | Air: 8kV, (IEC 61000-4-4) EFT: Power: 2kV | Signal: 2kV, (61000-4-5) Surge: Power: 2kV | Signal: 2kV

Grounding Point

The industrial switch features a grounding point for protection against external electrical surges

Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
Device Interface
  • 5 x 10/100Mbps ports
  • 4-pin removable terminal block
  • LED indicators
Performance
  • Data RAM Buffer: 56KB
  • Switching Fabric: 1Gbps
  • MAC Address Table: 1K entries
  • Forwarding rate: 0.744Mpps (64-byte packet size)
Special Features
  • Hardened components rated for extreme temperatures
  • VLAN Passthrough
Power
  • Input: 9 – 60V DC
  • Compatible power supply: TI-M6024 (sold separately)
  • Max. consumption: 1.686W @ 60V
Terminal Block
  • 4-pin terminal block
  • Wire range: 1.5mm2
  • Solid wire (AWG): 16-26
  • Stranded wire (AWG): 16-26
  • Torque: 3 lb. – In / 0.2Nm / 0.56Nm
  • Wire strip length: 6-7mm
MTBF
  • 3,100,000 hours @ 25° C
Housing
  • IP50 metal case
  • DIN-Rail mount
  • Wall mount
  • Grounding point
  • ESD 6kV protection
Operating Temperature
  • - 40° - 75° C (-40° - 167° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 85 x 60 x 27mm (3.34 x 2.36 x 1.06 in.)
Weight
  • 165g (5.82 oz.)
Certifications
  • CE
  • FCC
  • LVD
  • Shock (EN 60068-2-27)
  • Freefall (EN 60068-2-31)
  • Vibration (EN 60068-2-6)
  • ESD 6kV
  • EFT 6kV
  • Surge 6kV
Warranty
  • 2-Year

Содержимое упаковки
  • TI-ELC50
  • Removable terminal block
  • DIN-Rail mount and wall mount kit

Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.