skip to main content
Click to change country
TEG-10GBRJ100 Product Photo
TEG-10GBRJ100 Product Photo TEG-10GBRJ100 Product Photo TEG-10GBRJ100 Product Photo TEG-10GBRJ100 Product Photo

10G RJ45 Copper SFP+ Module (100m)

TEG-10GBRJ100 (Version V1)

  • Connect devices up to 100m (328 ft.) over Cat6A cabling (or better) at 10G speeds
  • Compliant with IEEE 802.3an 10 Gigabit Ethernet
  • Compliant with IEEE 802.3ab Gigabit Ethernet
  • Shielded RJ45 copper interface
  • Low Electromagnetic Interference (EMI) design
  • Small Form-Factor Pluggable (SFP+) and Multi-Source Agreement (MSA) compliant
  • Hot-Pluggable
  • Low power consumption
  • NDAA / TAA compliant (U.S. and Canada only)
NDAA/TAA Compliant

TRENDnet’s 10G RJ45 Copper SFP+ Module, model TEG-10GBRJ100, converts a standard SFP+ port into an RJ45 multi-gigabit port for additional high-speed copper connectivity up to 100m (328 ft.). This 10G copper SFP+ module works with standard SFP+ ports commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP+ ports for reliable copper connectivity with TRENDnet’s 10G copper SFP+ module.

SFP transceiver module labeled TRENDnet TEG-MGBS10 positioned below a network switch panel diagram with four Ethernet ports and one SFP port; a white arrow points from the module to the SFP port, indicating installation direction, all set against a gradient blue background

RJ45 Copper SFP+

Take advantage of unused SFP+ ports and repurpose them for RJ45 copper multi-gigabit connectivity.

Two location markers connected by a dotted line across a gradient blue background, with the distance labeled 100m (328 ft.) between them, indicating spatial separation or range

Gigabit Speeds

The 10G RJ45 copper SFP+ module spans distances up to 100m (328 ft.) and supports up to 10Gbps speeds.

Network switch with multiple ports shown at the top, one port highlighted for transceiver insertion; below, a transceiver module connected to an Ethernet cable with a white arrow pointing upward toward the designated port, all set against a gradient blue background

Compatibility

Compatible with an MSA compliant SFP+ port and multi-gigabit RJ45 copper connections.

SFP+ transceiver module labeled TEG-10GBRJ100 with RJ45 connector shown above two network switches, one rack-mounted and one vertical, both with Ethernet cables connected to the module, set against a gradient blue background with callouts for SFP+ MSA compliance and RJ45 connector

Ethernet Distance

Supports networking distances up to 100m (328 ft.)

Connection Interface

Converts an SFP+ port to a 10G RJ45 Ethernet port

Hot-Pluggable SFP+

Hot-pluggable 10G copper SFP+ compatible with an MSA compliant SFP+ port

Operating Temperature

This 10G copper SFP+ module features an operating temperature range of 0°– 70° C (0° – 158° F)

Standards
  • IEEE 802.3
  • IEEE 802.3ae
  • IEEE 802.3az
  • IEEE 802.3an
  • IEEE 802.3ab
Device Interface
  • SFP+ MSA compliant
  • RJ45 connector
  • Hot-pluggable
Data Transfer Rate
  • 1000Base-T
  • 10GBase-T
Distance
  • 10Gbps up to 100m (328 ft.) with Cat6A/7
  • 1G up to 100m (328 ft.) with Cat5e
Power
  • Max. consumption: 2.5W
Operating Temperature
  • 0° C – 70° C (32° F – 158° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 68.5 x 13.8 x 13.8mm (2.7 x 0.5 x 0.5 in.)
Weight
  • 23g (0.8 oz.)
Certifications
  • CE
  • FCC
Warranty
  • 3 year

Содержимое упаковки
  • TEG-10GBRJ100

Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.