Nome del file: EN_datasheet_TPE-S50_(v3.0R).pdf
Data
1/13/2022
Dimensioni del file
1.73 MB
Nome del file: FR_datasheet_TPE-S50_(v3.0R).pdf
Data
1/13/2022
Dimensioni del file
1.72 MB
Nome del file: GE_datasheet_TPE-S50_(v3.0R).pdf
Data
1/13/2022
Dimensioni del file
1.72 MB
Nome del file: PO_datasheet_TPE-S50_(v3.0R).pdf
Data
1/13/2022
Dimensioni del file
1.72 MB
Nome del file: SP_datasheet_TPE-S50_(v2.0R).pdf
Data
1/13/2022
Dimensioni del file
619.25 KB
Nome del file: RU_datasheet_TPE-S50_(v3.0R).pdf
Data
1/13/2022
Dimensioni del file
1.73 MB
Nome del file: IT_datasheet_TPE-S50_(v3.0R).pdf
Data
1/13/2022
Dimensioni del file
1.72 MB
Nome del file: qig_TPE-S50(V3)_121321.pdf
Data
1/13/2022
Dimensioni del file
3.62 MB
PNG Image
Dimensioni del file: 5.36 MB
Data: 1/13/2022
Scarica
PNG Image
Dimensioni del file: 3.16 MB
Data: 1/13/2022
Scarica
PNG Image
Dimensioni del file: 2.85 MB
Data: 1/13/2022
Scarica
PNG Image
Dimensioni del file: 5.55 MB
Data: 1/13/2022
Scarica
Yes, the TPE-S50 is wall mountable.
TRENDnet PoE switches will support 802.3af, 802.3at or both. The TPE-S50 supports 802.3af and 802.3at. Please check detailed product specifications under the Product section of our website.
If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE switches. Many non-...
Each switch will have a maximum amount of power that can be supplied to powered devices. The TPE-S50 has a 60 W total PoE budget. This is the overall amount of power for the entire switch. Please check detailed product specifications for PoE budget under the Products sections of our website....
You can find detailed product specifications on our website under the Products section.
This is an unmanaged switch. It does not have a management interface and is not configurable.
A switch cannot share an IP address provided by your ISP with multiple devices. You will need a router to share your Internet service with multiple devices. The switch can be used to expand the amount of available ports on your network....
Standard | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3af
- IEEE 802.3at
|
Interfaccia dispositivo | - 4 x porte Ethernet Veloce PoE+
- 2 x porta Ethernet Veloce
- Indicatori LED
- Montaggio a parete
|
Velocità di trasferimento dati | - Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
|
Rendimento | - Buffer RAM Dati: 56KB
- Switching Fabric: 1.2Gbps
- Tabella indirizzi MAC ingressi 1K
- Jumbo Frames: 15 KB
- Velocità invio: 0,89 Mpps (dimensione pacchetto 64-byte)
|
Alimentazione CA | - Ingresso: 100 - 240V CA, 50/60Hz, 1.5A, alimentazione interna
- Consumo massimo: 1,5 W (senza PD)
|
PoE | - Budget PoE: 60W
- Modalità PoE: Pin 1, 2, 3 e 6 di alimentazione
- Protezione da covracorrente
- Protezione da cortocircuito
|
MTBF | |
Temperatura di esercizio | - 0° – 40° C (32° – 104° F)
|
Umidità di esercizio | |
Dimensioni | - 140 x 75 x 28mm (5,5 x 3 x 1,1pollici)
|
Peso | |
Certificazioni | |
Garanzia | |
CONTENUTO DELLA CONFEZIONE |
- TPE-S50
- Guida rapida d'installazione
- Cavo di alimentazione
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.