Convertitore multimediale industriale da 10G SFP+ a 10G PoE++ per esterni (95W)
TI-OBF711 (Version V1)
- 1 porta in fibra ottica monomodale LC duplex 10G
- 1 x porta 10G PoE++ RJ45
- Supporta trasmissioni di rete in modalità singola a 1310 nm fino a 20 km (12,42 mi).
- Alloggiamento metallico impermeabile con grado di protezione IP67
- Fornisce fino a 95W per i dispositivi conformi a PoE, PoE+ e PoE++
- Range estremo di temperatura d'esercizio -40°– 75° C (-40° – 167° F)
- Include hardware per il montaggio su palo
- Conforme a NDAA/TAA (solo USA e Canada)
Scheda tecnica
Nome del file: EN_datasheet_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.70 MB
Nome del file: FR_datasheet_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.85 MB
Nome del file: GE_datasheet_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.88 MB
Nome del file: PO_datasheet_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.76 MB
Nome del file: SP_datasheet_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.86 MB
Nome del file: IT_datasheet_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.81 MB
Guida rapida per l'installazione
Nome del file: qig_lineart_TI-OBF711_(v1.xR).pdf
Data: 8/5/2025
Dimensioni del file: 4.35 MB
Immagine/i del prodotto
The TRENDnet TI-OBF711 supports 802.3af, 802.3at or 802.3bt draft. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE power sourcing equipment. Many non-standard PoE devices u...
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website....
Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. TX to RX and RX to TX....
To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive co...
While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our fiber converters. If the third party converter adheres to specifications and also does not use proprietary measures they should be compatible....
TRENDnet TI-OBF711 has an LC type connector.
You will need to identify the type of fiber cable you have. Whether it is multi-mode or single mode, if it is 62.5/125 µm or 50/125 µm, etc. Typically you can verify the cable type from the cable jacket, your network documentation or the specifications of the devices you currently have connected. Af...
Outdoor products are designed to withstand outdoor environments. Check the product specifications for IP ratings, operating temperature ranges, dust and water resistant....
| Standards |
|
|---|---|
| Interfaccia del dispositivo |
|
| Prestazioni |
|
| Fibra |
|
| PoE |
|
| Alimentazione |
|
| MTBF |
|
| Sistema di chiusura |
|
| Temperatura di funzionamento |
|
| Umidità di funzionamento |
|
| Dimensioni |
|
| Peso |
|
| Certificazioni |
|
| Garanzia |
|
CONTENUTO DELLA CONFEZIONE |
|
Tutti i riferimenti alla velocità sono solo a scopo comparativo. Specifiche, dimensioni e forma del prodotto possono variare senza preavviso, e l’aspetto reale può differire da quanto mostrato.
