skip to main content
TRENDnet Store
Click to change country

Adattatore di rete 10G PCIe

TEG-10GECTX   (Version V5)

   Select Another Version
  • Converte uno slot 3.0 x 4 PCIe in in una porta Ethernet da 10 Gigabit
  • Supporta velocità di connessione di 10Gbps, 2.5Gbps e 1Gbps
  • Supporta Tagging VLAN 802.1Q
  • Include staffe standard e a basso profilo
  • Compatibile con Windows® e Windows Server®
  • Conforme agli standard IEEE 802.3an e IEEE 802.3bz

Firmware

Driver (Windows & Windows Server)
  • Release Version : v1.00
  • Release Date: 2/2026
  • OS Compatibility: Windows 11, 10 (64-bit only), Windows Server 2025, 2022, 2019, and 2016

Nome del file: TEG-10GECSFP_v4_Driver.zip
SHA-1 Checksum: 7157D59AF18CFF1EBD12ACE54A26E3FFBAFD7175
Data: 2/12/2026
Dimensioni del file: 4.82 MB
Scarica

Scheda tecnica

Datasheet (English)
Nome del file: EN_datasheet_TEG-10GECTX_(v5.xR).pdf
Data: 2/23/2026
Dimensioni del file: 3.15 MB
Scarica Email
Datasheet (Français)
Nome del file: FR_datasheet_TEG-10GECTX_(v5.xR).pdf
Data: 2/23/2026
Dimensioni del file: 3.17 MB
Scarica Email
Datasheet (Deutsch)
Nome del file: GE_datasheet_TEG-10GECTX_(v5.xR).pdf
Data: 2/23/2026
Dimensioni del file: 3.11 MB
Scarica Email
Datasheet (Português)
Nome del file: PO_datasheet_TEG-10GECTX_(v5.xR).pdf
Data: 2/23/2026
Dimensioni del file: 3.11 MB
Scarica Email
Datasheet (Español)
Nome del file: SP_datasheet_TEG-10GECTX_(v5.xR).pdf
Data: 2/23/2026
Dimensioni del file: 3.14 MB
Scarica Email
Datasheet (Italiano)
Nome del file: IT_datasheet_TEG-10GECTX_(v5.xR).pdf
Data: 2/23/2026
Dimensioni del file: 3.16 MB
Scarica Email

Immagine/i del prodotto

TEG-10GECTX Product Photo (PNG Image 1)
PNG Image
Dimensioni del file: : 3.26 MB
Data: : 2/23/2026
Scarica
TEG-10GECTX Product Photo (PNG Image 2)
PNG Image
Dimensioni del file: : 4.22 MB
Data: : 2/23/2026
Scarica
TEG-10GECTX Product Photo (PNG Image 3)
PNG Image
Dimensioni del file: : 2.47 MB
Data: : 2/23/2026
Scarica
TEG-10GECTX Product Photo (PNG Image 4)
PNG Image
Dimensioni del file: : 5.46 MB
Data: : 2/23/2026
Scarica
TEG-10GECTX Product Photo (PNG Image 5)
PNG Image
Dimensioni del file: : 3.59 MB
Data: : 2/23/2026
Scarica
ROHS compliant Non-Disposable
What operating systems are supported by my adapter?
Operating system support is located in the product specifications. You can find detailed product specifications on our website under the Products section. ...
Why am I connecting at lower speeds than what the adapter supports?
The switch, router, or other network appliance you are connecting to must also support the same specifications to take full advantage of the adapters capabilities. For example, if you are connecting to a fast Ethernet switch you will only connect at 100Mbps and if you connect to a gigabit switch you...
Where can I find detailed specifications for the adapter?
You can find detailed product specifications on our website under the Products section.
What speeds are supported with this adapter?
The adapter is capable of speeds up to 10Gbps when connected to a 10Gbps device using Cat6a or higher Ethernet cables....
What type of Ethernet cable should I be using for 10G?
For 10G connections up to 100 meters (328 ft.) you will need to use Category 6a cables. You can use Category 6 cables for distances up to 55 meters (180 ft.)...
What can I do if my PC does not recognize the adapter?
If the adapter is not detected by the PC make sure that it is seated firmly and properly into a PCIe 3.0 x4 interface slot and try a different slot....
What can I check if Wake-on-LAN is not working?
Confirm that the link light is on when the system is powered off. If there is no link light, then there is no way for the TEG-10GECTX to receive the magic packet to wake the system. Check your BIOS settings to ensure WoL is enabled. Make sure the PC you are sending the magic packet from can ...
Standard
  • IEEE 802.3ab
  • IEEE 802.3bz 2.5GBASE-T
  • IEEE 802.3an 10GBASE-T
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1ad
  • IEEE 802.3x
  • IEEE 802.3az
Interfaccia hardware
  • Interfaccia PCIe Gen 3 x4
  • 1 x porta Ethernet RJ-45 10Gps (Velocità supportate: 10Gbps / 2.5Gbps / 1Gbps)
  • Indicatori LED
Requisiti relativi al cablaggio
  • 10GBASE‑T (10Gbps): coppia intrecciata Cat6 @ 55 m / 180 ft (max.) / coppia intrecciata Cat6A @ 100 m / 328 ft (max.)
  • 2.5GBASE-T (2.5Gbps): Coppia ritorta Cat5e @ 100m / 328 ft. (max.)
  • 1000BASE-T (1Gbps): Coppia ritorta Cat5e @ 100m / 328 ft. (max.)
Compatibilità
  • Windows® 11, 10
  • Windows® Server 2025, 2022, 2019, 2016
Jumbo Frame
  • Fino a 16KB
Supporto aggiuntivo
  • Tagging VLAN 802.1Q
  • Receive-side scaling (RSS)
  • Supporta offload del protocollo (ARP e NS)
  • Message Signaled Interrupts (MSI)
  • Rapporto di tolleranza della latenza (LTR)
  • Offload checksum IP, TCP e UPD
  • Supporta Wake on LAN
  • Supporta l'aggregazione di collegamenti
Potenza
  • Consumo massimo: 2,5 W
Temperatura di funzionamento
  • 0⁰– 40⁰ C (32⁰ – 104⁰ F)
Umidità di funzionamento
  • Max. 90% non condensante
Certificazioni
  • CE
  • FCC
Dimensioni
  • 120 x 88 x 22 mm (4,7 x 3,5 x 0,86 pollici)
Peso
  • 52 g (2,6 oz)
Garanzia
  • 3 anni

CONTENUTO DELLA CONFEZIONE
  • TEG-10GECTX
  • Staffe standard e a basso profilo

*Supporta lunghezze massime di cablaggio Cat6 e Cat6A in riferimento alla norma IEEE 802.3an; la produttività reale e la distanza dipendono dalla qualità del cavo.

Tutti i riferimenti alla velocità sono solo a scopo comparativo. Specifiche, dimensioni e forma del prodotto possono variare senza preavviso, e l’aspetto reale può differire da quanto mostrato.