The IDE to SATA Converter (TU-IDES) allows you to connect IDE devices such as CD, DVD and hard disk drives to a Serial ATA port on your computer's motherboard. Without software installation required, simply connect power and data cables to IDE devices to SATA connector on your computer.
- Connect any IDE CD, DVD or hard drive device to an available Serial ATA port
- Use your current IDE device on new SATA motherboards
- Utilizes Serial ATA 1.0 and hot-pluggable technology
- Master/slave hard drive emulation supported
- Supports PIO mode 0~4 and Ultra DMA mode 0~7
- Supports ATAPI Packet command set, and 48-bit LBA addressing
- Supports additional ATA commands for serial ATA SCR access
- Power save mode built-in
- Serial ATA Built In Self Test (BIST) ready
- 2-year limited warranty
| Hardware |
| Standard | - ATA 33/66/100/133, SATA 1.0
|
| Supported OS | - Any OS that supports ATA and SATA
|
| Input | - 7-pin female SATA data connector
- 4-pin power connector
|
| Output | - 40-pin IDE female connector to IDE device
|
| Cables | - 1x SATA cable
- 1 x Y power cable
|
| Power Consumption | |
| Dimension | - 57 x 35 x 12mm (2.3 x 1.4 x 0.4 in.)
|
| Weight | - Main: 15g (0.6oz.)
- With wires: 40g (1.4oz.)
|
| Temperature | - -20°C to 60°C (-4°F to 140°F)
|
| Humidity | - Max. 90% (non-condensing)
|
| Certification | |
| CONTENUTO DELLA CONFEZIONE |
- TU-IDES
- Quick Installation Guide
- SATA cable (25 cm/ 10 in.)
- Y power cable (10 cm/ 4 in.)
|
Tutti i riferimenti relativi alla velocità sono solo a scopo comparativo. Le specifiche, le dimensioni e la forma del prodotto sono soggette a modifiche senza preavviso e l'aspetto effettivo può differire da quello raffigurato nel presente documento.
United States (cambia).png)
.png)
.png)
