Nom de fichier: EN_datasheet_TEG-S327_(v1.0R).pdf
Date
5/3/2023
Taille du fichier
641.39 KB
Nom de fichier: FR_datasheet_TEG-S327_(v1.0R).pdf
Date
5/3/2023
Taille du fichier
738.11 KB
Nom de fichier: GE_datasheet_TEG-S327_(v1.0R).pdf
Date
5/3/2023
Taille du fichier
624.58 KB
Nom de fichier: SP_datasheet_TEG-S327_(v1.0R).pdf
Date
5/3/2023
Taille du fichier
641.80 KB
Nom de fichier: PO_datasheet_TEG-S327_(v1.0R).pdf
Date
5/3/2023
Taille du fichier
899.07 KB
Nom de fichier: IT_datasheet_TEG-S327_(v1.0R).pdf
Date
5/3/2023
Taille du fichier
671.79 KB
Nom de fichier: Lineart_QIG_TEG-S327(V1).pdf
Date
3/22/2023
Taille du fichier
884.10 KB
PNG Image
Taille du fichier: 3.11 MB
Date: 3/22/2023
Télécharger
PNG Image
Taille du fichier: 2.07 MB
Date: 3/22/2023
Télécharger
PNG Image
Taille du fichier: 2.04 MB
Date: 3/22/2023
Télécharger
PNG Image
Taille du fichier: 5.70 MB
Date: 3/22/2023
Télécharger
PNG Image
Taille du fichier: 4.36 MB
Date: 3/22/2023
Télécharger
You will need to be running Cat-5e or higher cabling for 2.5GBASE-T.
TEG-S327’s 2.5Gbps ports are ports 6 & 7, while ports 1-5 is rated at 1.0 Gbps. Please check your network adapter's specification and make sure that it supports 2.5 Gbps. Also, check if your network cable is Cat-5e or higher....
All ports on the TEG-S327 support Auto-MDIX. All ports can be used as an uplink port.
To share an Internet connection you will need a Router. The TEG-S327 can be utilized to expand the available ports on your existing Router or network....
The TEG-S327 supports jumbo frames up to 15KB.
The TEG-S327 is a non-manageable Switch. It is not configurable.
A switch cannot share an IP address provided by your ISP with multiple devices. You will need a router to share your Internet service with multiple devices. The switch can be used to expand the amount of available ports on your network....
This is an unmanaged switch. It does not have a management interface and is not configurable.
You can find detailed product specifications on our website under the Products section.
The TEG-S327 has 5 x 1Gbps ports and 2 x 2.5Gbps ports. To take advantage of these port speeds you will need to connect them to devices that support the same specifications. For example, for gigabit speeds you will need to connect the gigabit ports to gigabit capable devices. For 2.5Gbps you will ne...
The TEG-S327 is not rack mountable but is wall mountable.
The TEG-S327 is compatible with Cat5e or better cabling.
Normes | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ab
- IEEE 802.3bz
|
Interface du périphérique | - 5 ports Gigabit
- 2 ports 2,5GBASE-T (100Mb/s - 1Gb/s - 2,5Gb/s)
- Voyants LED
|
Débit de transfert des données | - Ethernet: 10Mb/s (half duplex), 20Mb/s (full-duplex)
- Fast Ethernet: 100Mb/s (half duplex), 200Mb/s (full- duplex)
- Gigabit: 2000Mb/s (full duplex)
- 2,5 Gigabits: 5Gb/s (full duplex)
|
Performances | - Capacité de commutation: 20Gb/s
- Mémoire tampon RAM: 384KB
- Tableau des adresses MAC: Entrées de 2K
- Débit de transmission: 14,88Mpps (paquets de 64 bytes)
- Trames Jumbo: 15KB
|
Fonctions spéciales | |
Alimentation | - Entrée: 100 - 240 V AC, 50/60Hz, 0,5A
- Sortie: Adaptateur secteur externe de 12V DC 1A
- Consommation max.: 6W
|
Ventilateur/Acoustique | - Conception sans ventilateur
|
MTBF | |
Température de fonctionnement | - 0° – 50° C (32° – 122° F)
|
Humidité en fonctionnement | - Max. 90% pas de condensation
|
Dimensions (L x l x H) | - 160 x 25 x 109mm (6,29 x 0,98 x 4,29 pouce)
|
Poids | |
Certifications | |
Garantie | |
CONTENU DE L'EMBALLAGE |
- TEG-S327
- Guide d’installation rapide
- Adaptateur secteur (12 V DC, 1 A)
|
Toutes les références au débit ne sont données qu’à titre de comparaison. Les spécifications, la taille et la forme du produit sont sujettes à modification sans avis préalable, et l’apparence réelle du produit peut différer de celle illustrée ici.