skip to main content
Click to change country

High Performance Plug-n-Play Ethernet Adapter

TE-PCI   (Version 1.0)

DISCONTINUED PRODUCT

The TE-PCI (Version 1.0) has been discontinued. For a list of discontinued products, click here.

Drivers

Driver (Linux)
Filename: Linux_TE-PCIW.zip
SHA-1 Checksum: 4CC2B5038C3C1C0D5680A919F6278C5EEDBDC810
Date: 7/25/2017
File Size: 12.46 KB
Download
Driver
Filename: Driver_TE-PCI.zip
SHA-1 Checksum: D08A7D4E9BA9C489B89E8FFD766933397950278F
Date: 7/25/2017
File Size: 1.11 MB
Download

Datasheet

Datasheet
Filename: Spec_TE-PCI.pdf
Date: 5/13/2013
File Size: 125.87 KB
Download Email
Hardware
Standards:
  • IEEE 802.3 10Base-2 and 10Base-T
On-board Connector:
  • RJ-45 and BNC
Media Interface:
  • UTP Cat. 3, 4, 5; EIA/TIA-568 non-standard 100-ohm STP cable; RG-58A/U coaxial cable
Data Bus Supported:
  • 32-bit, PCI Local Bus Specification 2.0 (Bus Master)
IRQ's Supported:
  • Assigned by the BIOS to a free IRQ (interrupt) number
I/O Base Address:
  • Assigned by the BIOS to a free I/O address block
LAN Chipset:
  • DEC 32-bit Intelligent Ethernet interface controller
Boot ROM Size:
  • 16Kb
FCC Compliance:
  • FCC Class A certification; FCC Class B certification
CE Mark:
  • Compliance with EMI EN50081-1, EN55022, EMS EN50082-1, IEC 801-2 (ESD), IEC 801-3 (RS), IEC 801-4 (EFT)
Power Consumption:
  • 2.72W max.
Temperature:
  • Operating: 32° - 131°F (0° - 55°C)
  • Storage: -4° - 176°F (-20° - 80°C)
Operating Humidity:
  • 10 to 90%, non-condensing

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in