Search FAQs
Browse by Product
How do I configure my computer's IP address?
FAQ ID: 322 Product: TV-IP300Updated:2/2/2005 8:49:33 PM
For Windows 2000/XP users:
- On the Desktop, right click on My Network Places > select Properties > right click on the Local Area Connection > select Properties, the Local Area Connection Properties Window will appear
- Under General tab, select Internet Protocol (TCP/IP) > click on Properties button, Internet Protocol (TCP/IP) Properties Window will appear
1. Select Use the following IP address option and enter the IP, Subnet Mask and Default gateway addresses.
2. Click OK to complete
For Windows 98/ME users:
- On the Desktop, right click on Network Neighborhood > select Properties > right click on the Local Area Connection > select Properties, the Local Area Connection Properties Window will appear
- Under Configuration tab, select your Network Adapter (TCP/IP protocol) > click on Properties button, TCP/IP Protocol Properties Window will appear
1. Select Specify an IP address option and enter the IP, Subnet Mask addresses.
- On the Desktop, right click on My Network Places > select Properties > right click on the Local Area Connection > select Properties, the Local Area Connection Properties Window will appear
- Under General tab, select Internet Protocol (TCP/IP) > click on Properties button, Internet Protocol (TCP/IP) Properties Window will appear
1. Select Use the following IP address option and enter the IP, Subnet Mask and Default gateway addresses.
2. Click OK to complete
For Windows 98/ME users:
- On the Desktop, right click on Network Neighborhood > select Properties > right click on the Local Area Connection > select Properties, the Local Area Connection Properties Window will appear
- Under Configuration tab, select your Network Adapter (TCP/IP protocol) > click on Properties button, TCP/IP Protocol Properties Window will appear
1. Select Specify an IP address option and enter the IP, Subnet Mask addresses.
Related FAQs:
- How can I view the TV-IP300(w) remotely if it’s behind a router or firewall.
- When I enter the IP address of the camera, the image does not load, why?
- How do I reset my TV-IP300(w) back to factory defaults?
- The image is blurry, how do I fix this?
- How can I email snapshots based on motion from my camera?
Attachments:
No attachments found.