TRENDnet's VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.
Test Pin Configuration | - RJ45 EIA, TIA-568A/568B, and crossover cables
- RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
- USOC 2, 4, 6, and 8
- Coax Video-BNC and CATV-F
- USB 3.0, USB 2.0
|
Transmitter Unit Interface | - 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
- 1 x USB 3.0/2.0 Type-B port
- Test button
- Mode button
- On/off button
- LED indicators
- Battery compartment
- Receiver unit attachment port
|
Remote Unit Interface | - 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
|
Compatible Cables* | - Cat 8, 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
- Coax Video-BNC and CATV-F cable (with included RJ45 to F adapters)
- RJ9, RJ11, RJ12, RJ14, RJ25, and RJ61 cables
- USOC 2, 4, 6, and 8
- USB 3.0 A to B
- USB 2.0 A to B
|
Tone Frequency | |
Special Features | - Tests grounding of shielded (screened) cables
- Identifies proper, severed, short circuit, and cross connected pins
- Continuous scan mode is design to accommodate testing with cable ends in different locations
- Manual scan is well suited for loop back cable testing
- Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type
- Blinking Hub/Switch Mode identifies connected hub/switch port
- Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones
- Tests cables lengths of up to 300 meters (1,000 ft.)
|
Power Source | - Transmitter: 9 V DC battery (not included)
- Remote unit: No power needed
|
Operating Temperature | |
Operating Humidity | |
Certifications | |
Dimensions | - Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.)
- Remote unit: 57 x 30 x 27 mm (2.2 x 1.2 x 1.1 in.)
|
Weight | - Transmitter: 144 g (5.1 oz.)
- Remote unit: 26 g (0.9 oz.)
|
Warranty | |
PACKAGE CONTENTS |
- TC-NT3
- Quick Installation Guide
- 2 x RJ45-to-F adapter
- Network patch cable (15 cm/6 in.)
- Carry pouch
|
*Not designed for live wires. Connecting tester to a live telephone wire may damage the tester.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.